|
|
Product Information
Printing
Printable area
Mechanical
Electrical
Environmental
Initialization
Safety approvals
Paper
Ink cartridges
Printing method |
On-demand ink jet |
Nozzle configuration |
Black: 64 nozzles |
Character mode:
Character Pitch |
Printing Column |
10 cpi* |
237 |
* characters per inch |
Raster graphics mode:
Horizontal resolution |
Printable width |
Available dots |
360 dpi* |
604 mm |
8561 |
720 dpi |
604 mm |
17123 |
1440 dpi |
604 mm |
34246 |
* dots per inch |
Resolution |
Maximum 1440 x 720 dpi |
Print direction |
Bidirectional |
Control code |
ESC/P Raster |
Line spacing |
1/6 inch or programmable in 1/360 inch increments |
Paper feed speed |
200 ± 10 m seconds per 1/6 inch line |
RAM |
10 MB |
Roll paper and cut sheets
A |
For roll paper, the minimum top margin is 3.0 mm (0.12")*. |
B-L |
For roll paper, the minimum left margin is 3.0 mm (0.12")*. |
B-R |
For roll paper, the minimum right margin is 3.0 mm (0.12")*. |
C |
For roll paper, the minimum bottom margin is 3.0 mm (0.12")*. |
* For roll paper, the following margin widths can be selected using the control panel as follows. For details, see ROLL MARG (Roll paper margin selection) in "Printer Setting menu (PRINTER SETTING MENU)". |
Parameter |
A |
B-L |
B-R |
C |
3 MM |
3 mm |
3 mm |
3 mm |
3 mm |
15 MM |
15 mm |
15 mm |
15 mm |
15 mm |
T/B 15 MM (Default) |
15 mm |
3 mm |
3 mm |
15 mm |
Note: |
The printer automatically detects the dimensions of the paper that is set. Print data that exceeds the printable area of the paper cannot be printed. |
Paper feed method |
Friction |
Paper path |
Roll paper or cut sheets with manual insertion |
Dimensions (printing) |
Width: 1,100 mm (43.31 inches) |
Weight |
43.5 kg (95.8 lb) without the ink cartridges |
|
120 V Model |
220-240 V Model |
Input voltage range |
90 to 132 V |
198 to 264 V |
Rated frequency range |
50 to 60 Hz |
|
Input frequency range |
49 to 61 Hz |
|
Rated current |
1.0 A |
0.5 A |
Power consumption |
Approx. 100 W (ISO10561 Letter Pattern) |
Note: |
Check the label on the back of the printer for voltage information. |
Temperature |
Operation: |
10 to 35°C (50 to 95°F) |
Humidity |
Operation: |
20 to 80% RH** |
* Stored in shipping container |
** Without condensation |
Operational conditions (temperature and humidity):
Hardware initialization when the power is turned on: |
|
|
The printer mechanism is set to its initial state. |
Software initialization when the ESC@ (initialize the printer) command is received: |
|
|
The print buffer is cleared. |
Panel button initialization by pressing the Pause button on the control panel for 3 seconds or more: |
|
|
Print head capping occurs. |
Safety standards:
U.S. model |
UL 1950, CSA 22.2 No. 950 |
European model |
Directive 73/23/EEC |
EMC:
U.S. model |
FCC part 15 subpart B class B |
European model |
Directive 89/336/EEC |
Australian model |
AS/NZS 3548 class B |
Note: |
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test paper samples before purchasing large quantities or printing large jobs. |
Roll paper:
Size |
210 to 610 mm (W) x 279 to 202000 mm (L)
210 to 610 mm (W) x 279 to 45000 mm (L) |
Outer diameter |
103 mm (4.06 inches) maximum for standard/optional 2-inch roll paper spindle |
Paper types |
Plain paper, special papers distributed by EPSON |
Thickness |
0.08 to 0.5 mm (0.003 to 0.020 inches) |
Weight |
64 g/m2 (17 lb) to 90 g/m2 (24 lb) |
Cut sheets:
Size |
B2 (515 x 728 mm) |
Paper types |
Plain paper, special papers distributed by EPSON |
Thickness |
0.08 to 0.11 mm |
Weight |
64 g/m2 (17 lb) to 90 g/m2 (24 lb) |
Note: |
|
|
Use paper under the following conditions: |
|
|
Temperature 15 to 25°C (59 to 77°F) |
EPSON Photo Quality Glossy Film should be stored under the following conditions: |
|
|
Temperature 15 to 30°C (59 to 86°F) |
Your printer accepts 110 ml ink cartridges.
Colors |
Black |
T480031 |
Print capacity* |
Approx. 28 pages/A1 (720 dpi, 40% duty) |
|
Cartridge life |
Within 6 months after opening package, at 25°C (77°F) |
|
Temperature |
Storage (uninstalled): |
-30 to 40°C (-22 to 104°F) |
|
Storage (installed): |
-20 to 40°C (-4 to 104°F) |
|
Transit: |
-30 to 60°C (-22 to 140°F) |
|
Freezing: |
-10°C (14°F)** |
Dimensions |
25.1 (W) x 141.1 (D) x 105.3 (H) mm |
|
Weight |
Approx. 200 g (0.44 lb.) |
|
Capacity |
110 ml |
* The print capacity may vary, depending on how often you use the print head cleaning function and how often you use the printer. |
** Ink thaws and is usable after approximately 3 hours at 25°C (77°F). |
Caution: |
|
|
|
Next |
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |