|
|
The Control Panel
Maintenance mode setting procedure
Maintenance mode list
Details of maintenance mode items
This section describes how to enter the maintenance mode and make settings with the buttons on the control panel.
To make the maintenance mode settings, follow the steps below.
Note: |
|
|
|
Enter the maintenance mode. Make sure that the printer is turned off. While pressing and holding the Pause |
|
Select an item. Press the Paper Feed |
|
Set the item. Press the Menu |
|
Select a parameter. Press the Paper Feed |
|
Set the parameter. Press the Enter If the parameter is used for execution only, press the Enter |
Note: |
|
|
Exit the maintenance mode. Press the Power |
Item |
First parameters |
Second parameters |
|
EXECUTE |
|
ENGLISH, FRENCH, ITALIAN, GERMAN, PORTUGUE, SPANISH, DUTCH |
- |
|
OFF, ROLL |
- |
|
METER, FEET/INCH |
- |
|
0% - 150% |
- |
|
EXECUTE |
- |
|
ON, OFF |
- |
|
5sec, 3sec, OFF (MANUAL FEED) |
- |
|
EXECUTE |
- |
|
EPSON Stylus Pro 9800/7800:
EPSON Stylus Pro 9400/7400: |
MANUFACTURE, COLOR, INK TYPE, INK CAPACITY, INK LEVEL, PRODUCTION DATE, EXPIRATION DATE, INK LIFE, INK AGE |
Data received from the host computer can be printed out in hexadecimal numbers.
To print out the data, follow the steps below.
| Make sure that paper is loaded in the printer. |
|
While in the maintenance mode, press the Paper Feed |
|
Press the Menu |
The print data in the print buffer is printed with 16-byte hex. data in the left column and corresponding ASCII characters in the right column.
Note: |
|
You can select the language to be displayed on the LCD.
To select a suitable language, follow the steps below.
|
While in the maintenance mode, press the Paper Feed |
|
Press the Paper Feed |
|
Press the Enter |
Note: |
|
You can select a paper remaining counter function. When this function is on, ROLL PAPER COUNTER appears on the PRINTER SETUP menu.
|
While in the maintenance mode, press the Paper Feed |
|
Press the Paper Feed |
|
Press the Enter |
You can select a unit of measurement to use to display length. To select a unit, follow the steps below.
|
While in the maintenance mode, press the Paper Feed |
|
Press the Paper Feed |
|
Press the Enter |
You can select a cutting pressure.
You can perform ultrasonic head cleaning.
You can save roll paper by not feeding paper after the power is on.
You can select the time it takes for auto loading of the cut sheet. When you select OFF, the printer does not feed the paper automatically. In this case, you need to press the Pause button to feed the paper.
You can set all setting values you made in the Menu mode to their factory set value.
For maintenance service person only
Previous |
Version NPD1450-00, Copyright © 2005, SEIKO EPSON CORPORATION |