|
|
Product Information
For using your printer with a PC
For using your printer with a Macintosh
To use your printer, you need Microsoft® Windows® 95, Windows® 98, Windows® NT 4.0; and a shielded, twisted-pair parallel cable. If you want to connect your printer to a USB port, you need a Windows 98 pre-installed PC equipped with a USB port; and a shielded USB cable.
Minimum system |
Recommended system |
i486/25 MHz for Windows 95 and NT 4.0 |
Pentium II 300 MHz or higher processor |
16 MB RAM |
128 MB RAM or more |
20 MB hard disk space for Windows 95 and 98 |
400 MB or more free disk space |
VGA monitor |
VGA or better monitor |
Your computer dealer can help you update your system if it does not meet these requirements.
To use this printer, your Apple® Macintosh® must meet the following system requirements. You also need a USB cable to connect this printer to Apple Macintosh computers.
Minimum system |
Recommended system |
PowerPC |
PowerPC 604e 300 MHz or higher processor |
System 7.6.1 |
System 7.6.1 or later |
14 MB of available memory |
25 MB or more of available memory |
Note: |
|
|
In addition to these system and memory requirements, you also need 10 MB of free hard disk space to install your printer software. To print, you need extra hard disk space amounting to about double the size of the files you want to print.
Previous |
Next |
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |