|
|
Product Information
To use your printer with a PC
To use your printer with a Macintosh
To use your printer, you need Microsoft® Windows® Me, 98, 95, 2000, or NT® 4.0, and a shielded, twisted-pair parallel cable. If you want to connect your printer to a USB port, you need a Windows 98 or 2000 pre-installed PC equipped with a USB port, and a shielded USB cable.
Minimum system |
Recommended system |
i486/25 MHz for Windows 95 and NT 4.0 |
Pentium II 450 MHz or higher processor |
16 MB RAM for Windows 98, 95, and NT 4.0 |
128 MB RAM or more |
20 MB hard disk space for Windows Me, 98, and 95 |
500 MB or more free disk space |
VGA monitor |
VGA or better monitor |
Your computer dealer can help you update your system if it does not meet these requirements.
To use this printer, your Apple® Macintosh® must meet the following system requirements. You also need a USB cable to connect this printer to Apple Macintosh computers.
Minimum system |
Recommended system |
PowerPC |
PowerPC G3 400 MHz or higher processor |
Mac OS 7.6.1 |
Mac OS 8.6.x or 9.x |
16 MB of available memory 20 MB of available memory when background printing is turned on |
42 MB or more of available memory 70 MB of available memory when background printing is turned on |
Note: |
|
|
|
In addition to these system and memory requirements, you also need 12 MB of free hard disk space to install your printer software. To print, 500 MB or more of free hard disk space is recommended.
Previous |
Next |
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |