|
|
The Control Panel
Maintenance mode setting procedure
Maintenance mode list
Details of maintenance mode items
This section describes how to enter the maintenance mode and how to make settings with the buttons on the control panel.
To make the maintenance mode settings, follow the steps below.
Note: |
|
|
Enters the maintenance mode Confirm the printer is turned off first. While pressing and holding the Pause |
|
Select an item Press the Paper Feed |
|
Set the item Press the Menu |
|
Select a parameter Press the Paper Feed |
|
Set the parameter Press the Menu If the parameter is for execution only, press the Menu |
Note: |
|
|
Exit the maintenance mode Press the Power |
Item |
First parameters |
Second parameters |
|
EXEC |
|
ENGLISH, FRENCH, ITALIAN, GERMAN, SPANISH, PORTUGUESE |
- |
|
OFF, ROLL PAPER, CUT SHEET |
- |
|
METER, FEET/INCHES |
- |
|
0% - 150% |
- |
|
EXEC |
- |
|
EXEC |
- |
|
MK INFO
Note: |
MANUFACT, CARTRIDG, INK TYPE, INK CAP, INK LEFT, PROD DATE, EXPIRE DATE, INK LIFE, AGE |
Data received from the host computer can be printed out in hexadecimal numbers.
To print it out, follow the steps below.
| Make sure that paper is loaded in the printer. |
|
In maintenance mode, press the Paper Feed |
|
Press the Menu |
The print data in the print buffer is printed with 16-byte hex. data in the left column, and corresponding ASCII characters in the right column.
Note: |
|
You can select the language to be displayed on the LCD.
To select a suitable language, follow the steps below.
|
In maintenance mode, press the Paper Feed |
|
Press the Paper Feed |
|
Press the Menu |
Note: |
|
You can select a paper remaining counter function. When this function is on, ROLL COUNTER or SHEET COUNTER appears on the PRINTER SETUP menu.
|
In the maintenance mode, press the Paper Feed |
|
Press the Paper Feed |
|
Press the Menu |
You can select the units for displaying length. To select the units, follow the steps below.
Note: |
|
|
In maintenance mode, press the Paper Feed |
|
Press the Paper Feed |
|
Press the Menu |
You can select cutting pressure.
You can perform ultrasonic head cleaning.
You can set all setting values you made in the SelecType mode to their factory set value.
For maintenance service person only.
Previous |
Version NPD1123-00, Copyright © 2005, SEIKO EPSON CORPORATION |