|
|
Product Information
USB interface
IEEE1394 Interface
Your printer is equipped with a USB interface, an IEEE1394 interface and an Ethernet interface.
The printer's built-in USB interface is based on the standards specified in the Universal Serial Bus Specifications Revision 2.0, the Universal Serial Bus Specification Revision 1.1, and the Universal Serial Bus Device Class Definition for Printing Devices Version 1.1. This interface has the following characteristics.
Standard |
Based on Universal Serial Bus Specifications Revision 2.0, Universal Serial Bus Specification Revision 1.1, Universal Serial Bus Device Class Definition for Printing Devices Version 1.1 |
Bit rate |
480 Mbps (High Speed Mode) |
Data encoding |
NRZI |
Adaptable connector |
USB Series B |
Recommended cable length |
5 meters (5.5 yard) |
Note: |
|
The IEEE 1394 interface has the following characteristics.
Data transfer method |
Half-duplex Data/Strobe differential serial |
Synchronization method |
DS-Link bit level encoding |
Encoding/decoding |
DS-Link bit level encoding |
Compatible connectors |
IEEE 1394-1995 compliant plug (6 contact) |
Pin number |
Signal name |
Function |
1 |
VP |
Cable power supply |
2 |
VG |
Cable ground |
3 |
TPB* |
Strobe during receipt, data during transmission (differential pair) |
4 |
TPB |
|
5 |
TPA* |
Data during receipt, strobe during transmission (differential pair) |
6 |
TPA |
Power class code 100 No power supply from external sources Fitted with a repeat function with bus power |
Previous |
Version NPD1123-00, Copyright © 2005, SEIKO EPSON CORPORATION |