Reference Guide
|
|
Printing with Macintosh
Setting Up Your Printer on a Network
Setting up your printer as a shared printer
Accessing the printer through a network
This section tells you how to set up your printer so that other computers on a network can use it.
First, you need to set up the printer as a shared printer on the computer to which the printer is connected. Then, you must signify the network path to the printer from each computer to use the printer, and install the printer software on those computers.
Setting up your printer as a shared printer
Follow these steps to share a printer connected directly to your computer with other computers on an AppleTalk network.
|
Turn on the printer.
|
|
Select Chooser from the Apple menu and click the printer's icon. Then select the port to which the printer is connected.
|
|
Click the Setup button. The following dialog box appears.
|
|
Select the Share this Printer check box, then type the printer name and password information as needed.
|
|
Click OK. The name of the shared printer appears in the port list in the Chooser.
|
|
Close the Chooser.
|
[Top]
Accessing the printer through a network
To access your printer from another computer on the network, follow these steps.
|
Turn on your printer.
|
|
On each computer from which you want to access the printer, select Chooser from the Apple menu. Then click your printer's icon and select the printer port you want to use from the Select a printer port box on the right. You can only select from the printers connected to your current AppleTalk zone.
|
|
If the following dialog box appears, enter the password for the printer, then click OK.
|
|
Select the appropriate Background Printing option button to turn background printing on or off.
|
|
Close the Chooser.
|
[Top]
Version 1.10E, Copyright © 2002, SEIKO EPSON CORPORATION |