|
|
Product Information
To use your printer with a PC
To use your printer with a Macintosh
To use your printer, you need Microsoft® Windows® Millennium Edition , 98, 95, 2000, or NT 4.0, and a shielded, twisted-pair parallel cable. If you want to connect your printer to a USB port, you need a Windows Me, 98, or 2000 pre-installed PC equipped with a USB port, and a shielded USB cable.
Your computer should also meet the following system requirements:
Minimum system |
Recommended system |
Pentium for Windows 98, 95, and NT 4.0 |
Pentium II 400 MHz or higher processor |
32 MB RAM for Windows Me, 98, 95, NT 4.0 |
128 MB RAM or more |
100 MB hard disk space for Windows Me, 98, 95, 2000, and NT 4.0 |
500 MB*1/300 MB*2 or more free disk space (B0) |
VGA monitor |
VGA or better monitor |
*1 is for graphic data use |
*2 is for line data use |
Your computer dealer can help you update your system if it does not meet these requirements.
To use this printer, your Apple® Macintosh® must meet the following system requirements. You also need a USB cable to connect this printer to your Macintosh.
Minimum system |
Recommended system |
PowerPC |
PowerPC G3 350MHz*1/PowerPC G3 300 MHz*2 or higher processor |
System 7.6.1 |
Mac OS 8.1 or later |
11 MB of available memory |
33 MB or more of available memory |
- |
500 MB*1/300 MB*2 or more free disk space (B0) |
*1 is for graphic data use |
*2 is for line data use |
Note: |
|
|
|
In addition to these system and memory requirements, you also need 15 MB of free hard disk space to install your printer software.
Previous |
Next |
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |