![](files/01.gif) |
Miscellaneous Printout Problems
Incorrect or garbled characters
Incorrect margins
Inverted image
Blank pages print
Printout has smears
Printing is too slow
Using the Paper Feed/Paper Eject function
Incorrect or garbled characters
After trying one or more of these solutions, run a printer operation check to check your results.
See Running a printer operation check
-
Load and eject plain paper several times. If the problem persists, ink may have leaked inside the printer. In this case, wipe the inside of the printer with a soft, clean cloth.
See Cleaning Your Printer
If you try all of the methods above and cannot solve the problem, see the following:
Increasing the Print Speed
Using the Paper Feed/Paper Eject function
Feed paper and clean the roller inside.
![](files/step_1.gif) |
Load several sheets of A4 size paper.
|
![](files/step_2.gif) |
Press the Setup button on the control panel to open the Setup menu.
|
![](files/step_4.gif) |
Press the OK button and follow the instructions on the LCD panel.
|
![](files/step_5.gif) |
Repeat Steps 2 to 4 as needed.
|
| ![](files/01.gif) |