|
|
Other Information / Printer Specifications
Using the printer
Using the User's Guide
Refer to the appropriate section below for the minimum and recommended computer system requirements necessary to use this printer.
To use your printer, you need to have Microsoft® Windows® XP, Me, 98, or 2000 installed.
USB connection:
To connect your printer via a standard, shielded USB 1.1 cable, you need a Windows XP, 98, or 2000 pre-installed PC equipped with a USB port. For Windows Me users, your PC must be a Windows Me pre-installed model or upgraded from a Windows 98 pre-installed model. To use the USB 2.0 cable, you need a Windows XP or 2000 Pre-installed PC equipped with a USB 2.0 port.
If you want to connect your printer to a IEEE 1394 port, you need a Windows XP, Me, or 2000 pre-installed PC equipped with a IEEE 1394 port and the printer must be connected via a shielded IEEE 1394 cable.
Your computer should also meet the following system requirements.
Minimum System Requirements |
Recommended System |
Pentium 150 MHz processor for Windows Me Pentium processor for Windows 98 Pentium 300 MHz processor for Windows XP Pentium 133 MHz processor for Windows 2000 |
Pentium 2.0 GHz or higher |
64 MB RAM for Windows Me and 98 128 MB RAM for Windows XP and 2000 |
256 MB RAM or more |
50 MB hard disk space for Windows Me and 98 200 MB hard disk space for Windows XP 100 MB hard disk space for Windows 2000 |
500 MB hard disk space or more for Windows Me and 98 1 GB hard disk space or more for Windows XP and 2000 |
USB and IEEE 1394 for Windows Me, XP, and 2000 USB for Windows 98 |
USB 2.0 and IEEE 1394 |
SVGA monitor |
SVGA monitor |
Your computer dealer can help you update your system if it does not meet these requirements.
To connect this printer to Apple® Macintosh® computers, you must use a USB cable.
Your Macintosh must also meet the following system requirements.
Minimum System Requirements |
Recommended System |
Mac OS 9.1 or later Mac OS X, 10.2, or later |
Mac OS 9.1 or later Mac OS X, 10.2, or later |
PowerPC G3 233 MHz for Mac OS 9.1 or later PowerPC G3 233 MHz for Mac OS X, 10.2, or later |
PowerPC G4 for Mac OS 9.1 or later PowerPC G4 for Mac OS X, 10.2, or later |
128 MB RAM for Mac OS 9.1 or later 192 MB RAM for Mac OS X, 10.2, or later |
256 MB RAM or more for Mac OS 9.1 or later 256 MB RAM or more for Mac OS X, 10.2, or later |
50 MB hard disc space for Mac OS 9.1 or later 50 MB hard disc space for Mac OS X, 10.2, or later |
1 GB hard disc space or more for Mac OS 9.1 or later 1 GB hard disc space or more for Mac OS X, 10.2, or later |
USB and IEEE 1394 for Mac OS 9.1 or later USB and IEEE 1394 for Mac OS X, 10.2, or later |
USB 2.0 and IEEE 1394 for Mac OS 9.1 or later USB 2.0 and IEEE 1394 for Mac OS X, 10.2, or later |
SVGA monitor for Mac OS 9.1 or later SVGA monitor for Mac OS X, 10.2, or later |
SVGA monitor for Mac OS 9.1 or later SVGA monitor for Mac OS X, 10.2, or later |
Note: |
|
|
In addition to these system and memory requirements, you need 20 MB of free hard disk space to install your printer software. To print, you also need extra hard disk space amounting to about twice the size of the file that you want to print.
Refer to the appropriate section below for the minimum browser requirements necessary to use the User's Guide.
For Windows |
|
Browser |
Microsoft Internet Explorer 4.0 or later (recommended) |
For Macintosh |
|
Browser |
Microsoft Internet Explorer 4.0 or later (recommended) |
Previous |
Next |
Version NPD1208-00, Copyright © 2005, SEIKO EPSON CORPORATION |