Reference Guide

Index Search Glossary Contents Help

Problem Solver

Paper Does Not Feed Correctly

Paper does not feed
Multiple pages feed
Paper jams
Paper improperly loaded
Paper is not ejected fully or is wrinkled
Paper does not feed correctly when using the double-sided printing feature

If one of the following problems has occurred, try the solution(s) listed for that problem.

Paper does not feed

Remove the stack of paper and make sure of the following:

• The paper is not curled or creased.

• The paper is not too old. See the instructions that came with the paper for more information.

• The paper is not loaded higher than the arrow on the left edge guide.

• Paper is not jammed inside the printer. If it is, remove the jammed paper.

• The black and/or color ink cartridges are not empty. If one is, replace the appropriate cartridge. To determine which cartridge is empty, see Replacing an Ink Cartridge.

• Load the paper again. Make sure that you follow any special loading instructions that came with your paper. Also see the paper handling section in this guide.

[Top]

Multiple pages feed

• Make sure that the paper stack fits under the arrow mark located on the inside surface on the left edge guide.

• Make sure that the left edge guide is snug to the left edge of the paper.

• Make sure that the paper is not curled or folded. If so, flatten it or curl it slightly toward the opposite side before loading.

• Make sure that the position of the adjust lever is appropriate for the media type. When printing on media of normal thickness, set the adjust lever to the  position. When printing on envelopes and thick media, set the position to .

• Remove the stack of paper and make sure that the paper is not too thin. See Paper for specifications. Fan the edges of the stack to separate the sheets, then reload the paper.

• If too many copies of a document are being printed, check the Copies setting on the printer software's Page Layout menu (Windows) or in the Print dialog box (Macintosh) and in your application.
  For Windows, Copies.
  For Macintosh, Making Settings in the Print Dialog Box.

[Top]

Paper jams

For a sheet paper jam, turn the printer off, open the printer cover, remove all of the paper inside including any torn pieces, close the printer cover, turn the printer on, and then reload the paper in the sheet feeder.

For a roll paper jam, hold down the  roll paper button for about 3 seconds to feed the paper in reverse. If the paper does not feed in reverse completely, hold down the  roll paper button for about 3 seconds to feed the paper in reverse again. And then roll up the roll paper. If the error does not clear, turn the printer off, open the printer cover, gently remove the roll paper backward, and then close the printer cover.

Note:

If you cannot remove a foreign object easily by yourself, do not use force and do not disassemble the printer. Call your dealer for assistance.

If your paper jams frequently, make sure of the following:

• The paper is smooth, not curled or wrinkled.

• The printable side of the paper is face up in the sheet feeder.

• The paper stack was fanned before loading.

• The paper is not loaded above the arrow on the left edge guide.

• The number of sheets in the paper stack does not exceed the limit specified for that media.

See Loading capacities for EPSON special media for details.

• The left edge guide is adjusted to fit your paper.

• The printer is on a flat, stable surface that extends beyond the printer base in all directions. The printer will not operate properly if it is tilted.

[Top]

Paper improperly loaded

If you have loaded the paper too far into the printer, the printer cannot feed the paper correctly. Turn the printer off and gently remove the paper. Then turn the printer on and reload the paper properly.

[Top]

Paper is not ejected fully or is wrinkled

Try one or more of these solutions:

• If the paper does not eject fully, press the  maitenance button, then open the printer cover and remove the paper. Also, check the Paper Size setting in from your application or printer software.

• If the paper is wrinkled when it comes out, it may be damp or too thin. Load a new stack.

Note:

Store any unused paper in its original packaging in a dry area. See Paper for specifications.

[Top]

Paper does not feed correctly when using the double-sided printing feature

If multiple pages are simultaneously misfed into the printer when using the double-sided printing feature, remove the paper as instructed in Multiple pages feed. If the paper that was fed in error has not been creased or wrinkled, it may still be usable. Reload only the usable paper properly into the printer.

If a paper jam should occur while using the double-sided printing feature, remove the paper as instructed in Paper jams. If multiple print jobs have been sent to the printer when the paper jam occurs, check the page settings in your application and confirm that the paper is loaded properly to ensure that no pages are skipped and that the document is printed correctly.

[Top]

Previous

Next