|
|
|
|||||||||||||||||||||||||||||||||
Printing with Windows
General tips
Follow the instructions in this section to increase the printing speed of your printer.
Just as printing at a high resolution requires more processing time than printing at a low resolution, printing in color takes longer than printing in black-and-white because the volume of data in a color document is much greater. For this reason, it is important to be selective in your use of color if you also require a fast print speed.
However, even if your document requires the highest resolution and extensive use of color — for example, when you are printing a camera-ready composite that includes color photographs — it may still be possible to optimize the print speed by adjusting other printing conditions. Keep in mind that changing some conditions to increase the print speed may also lower print quality.
The following table shows the factors that inversely affect print speed and print quality (increasing one will decrease the other).
|
Print quality |
Lower |
Higher |
Printer software menu |
|
|
Printer software settings |
Print Quality |
Economy, Normal |
Photo |
Advanced dialog box |
|
High Speed |
On |
Off |
||
|
Finest Detail |
Off |
On |
||
|
Data characteristics |
Image size |
Small |
Large |
|
|
Resolution |
Low |
High |
||
The table below shows the factors related to print speed only.
|
Print speed |
Faster |
Slower |
Printer software menu |
|
|
Printer software settings |
Ink |
Black |
Color |
Advanced dialog box, Main menu |
|
Flip Horizontal* |
Off |
On |
Advanced dialog box |
|
|
Collate* |
Off |
On |
Paper menu |
|
|
Reverse Order* |
Off |
On |
||
|
Data characteristics |
Variety of colors |
Grayscale** |
Full color |
|
|
Hardware resources |
System speed |
Faster |
Slower |
|
|
HDD free space |
Large |
Small |
||
|
Memory free space |
Large |
Small |
||
|
Software status |
Running applications |
One |
Many |
|
|
Virtual memory |
Not in use |
In use |
||
 | * Varies depending on the printer software and application that you are using. |
| ** Grayscale means using black ink only to print varying shades of gray, ranging from pure black to pure white. |
You can make certain print speed settings in the Speed & Progress dialog box. Click the Speed & Progress button on your printer software's Utility menu. The following dialog box appears.
The available settings that are related to print speed are as follows:
To print multiple copies of your document faster, select High Speed Copies. This speeds up printing by using your hard disk space as a cache when printing multiple copies of your document.
 Previous |
 Next |
| Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |
