Reference Guide

Index
Search
Glossary
Contents
Help

Various Printing Options

Printing on Envelopes

Loading envelopes
Printing on envelopes

When printing on envelopes, please note the following:

Note:
The folding quality and thickness of envelopes varies widely. If the total thickness of the stack of envelopes exceeds 10 mm, press each envelope in the stack flat before loading. If print quality declines when a stack of envelopes is loaded, load one envelope at a time.

A:

The minimum top margin is 3.0 mm (0.12").

When loading multiple sheets of EPSON Photo Quality Glossy Film, the minimum top margin is 30.0 mm (1.2").

B-L:

The minimum left margin is 3.0 mm (0.12").

B-R:

The minimum right margin is as follows:
3.0 mm (0.12") for single sheets and C6 envelopes.
7.0 mm (0.28") for DL envelopes.
28.0 mm (1.10") for No. 10 envelopes.

C:

The minimum bottom margin is 14.0 mm (0.55").

:

You can extend the minimum bottom margin to 3 mm by selecting the Minimize Margins check box under More Options on the printer driver's Page Layout menu (Windows) or the Maximum option for Printable Area in the Page Setup dialog box (Macintosh). However, print quality may decline in the expanded area. Before printing large jobs using this setting, print a single sheet to confirm printout quality.

Loading envelopes

Refer to the section below.

Envelopes


[Top]

Printing on envelopes

Access the printer driver.
Accessing the Printer Software for Windows
Accessing the Printer Software for Macintosh

Select Plain Paper as the Type setting on the Main menu (Windows) or the Media Type setting in the Print dialog box (Macintosh).

Select the appropriate envelope size from the available Size settings on the Main menu (Windows) or the Paper Size settings in the Page Setup dialog box (Macintosh).

Select Portrait as the Orientation setting.

Click OK to close the driver settings dialog box.

Print your data.


[Top]


Previous
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION