Reference Guide

Index	Search	Glossary

Contents	Help

Problem Solver

EPSON PhotoStarter does not work correctly

Windows 98/Windows Me users

Try one or more of these solutions.

Make sure EPSON PhotoStarter is installed correctly. Refer to the Setup sheet for installation instructions.

If your selected application does not open automatically when you load a PC card, open the application manually.

Check your settings in EPSON PhotoStarter. To find out about changing settings in EPSON PhotoStarter, see Accessing the EPSON PhotoStarter.

Windows 98/Windows Me users

Before disconnecting a USB cable while your computer is running, you need to turn off monitoring in CardMonitor. To turn off monitoring, right-click the CardMonitor icon on the taskbar, and select Turn off monitoring. After disconnecting the USB cable, select Resume monitoring.

If your computer seems very slow while CardMonitor is on, try one or both of the following solutions.

Turn off monitoring as described above.

Shut down your computer and disconnect all USB cables while the computer is off. Then, start the computer and reconnect all USB cables while your computer is running.

[Top]