Reference Guide
|
|
Problem Solver
Paper Doesn't Feed Correctly
Paper doesn't feed
Multiple pages feed
The paper jams
Paper isn't ejected fully or is wrinkled
If one of the following problems has occurred, try the solution(s) listed for the problem.
Paper doesn't feed
Remove the stack of paper and make sure of the following:
-
The paper isn't curled or creased.
-
The paper isn't too old. See the instructions that came with the paper for more information.
-
The paper isn't loaded above the arrow on the left edge guide.
-
Paper isn't jammed inside. If it is, remove the jammed paper.
Then, load the paper again. Make sure you follow any special loading instructions that came with your paper. See also the paper handling section in this guide.
[Top]
Multiple pages feed
-
Make sure that the paper stack fits under the arrow mark located on the inside surface on the left edge guide.
-
Make sure that the left edge guide is snug to the left edge of the paper.
-
Make sure that the paper is not curled or folded. If so, flatten it or curl it slightly toward the opposite side before loading.
-
Make sure that the position of the adjust lever is appropriate for the media type. When printing on media of normal thickness, set the adjust lever to the "-" position. When printing on envelopes and thick media, set the position to "+" .
-
Remove the stack of paper and make sure the paper is not too thin. See Paper for specifications. Fan the edges of the stack to separate the sheets, then reload the paper.
-
If too many copies of a document are being printed, check the Copies setting on the printer driver's Paper menu (for Windows) or in the Print dialog box (for Macintosh) and in your application. For instructions, see Modifying the printout style for Windows, or Making Changes to Printer Settings for Macintosh.
[Top]
The paper jams
Press the maintenance button to eject the jammed paper. If the error does not clear, open the printer cover and remove all of the paper inside, including any torn pieces. Then, reload the paper in the sheet feeder and press maintenance button to resume printing.
|
Note:
|
|
If you cannot remove a foreign object easily by yourself, do not use force and do not disassemble the printer. Call your dealer for assistance.
|
If your paper jams frequently, make sure of the following:
-
The paper is smooth, not curled or wrinkled.
-
Make sure that the printable side of the paper is face up in the sheet feeder.
-
The paper stack was fanned before loading.
-
The paper isn't loaded above the arrow on the left edge guide.
-
The left edge guide is adjusted to fit your paper.
-
Make sure that the printer is on a flat, stable surface that extends beyond the printer base in all directions. The printer will not operate properly if it is tilted.
[Top]
Paper isn't ejected fully or is wrinkled
Try one or more of these solutions:
-
If the paper doesn't eject fully, press the maintenance button, then open the printer cover and remove the paper. Also, check the Paper Size setting in your application or printer driver.
-
If the paper is wrinkled when it comes out, it may be damp or too thin. Load a new stack.
|
Note:
|
|
Store any unused paper in its original packaging in a dry area. See Paper for specifications.
|
[Top]
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |