Reference Guide

Index	Search	Glossary

Contents	Help

How To / Using the Optional Automatic Roll Paper Cutter

Using the Photo Catcher

You can carry out normal printing with the cutter and the Photo Catcher attached. However, you also need to attach the output tray to the printer. To attach the output tray, follow the instructions below.

Join the hole that is on the right of the output tray and the prong that is on the right of the cutter's paper feeder.

Press the lever that is on the left side of the output tray to the right.

Leaning the output tray, then insert the prong that is on the left of the output tray into the slot on the left of the cutter's paper feeder.

Note:

If you print on the envelopes or on the CD-R, remove the cutter. For details, refer to Removing the Automatic Roll Paper Cutter.

By standing the Photo Catcher, you can store both the Photo Catcher and the output tray as shown below.

[Top]