|
|
Product Information / Printer Specifications
Printable area
Note: |
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs. |
Single sheets:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Plain bond paper, special papers distributed by EPSON |
Thickness |
0.08 mm to 0.11 mm (0.003 to 0.004 inch) |
Weight |
64 g/m2 (17 lb) to 90 g/m2 (24 lb) |
Envelopes:
Size |
No. 10 (104.8 mm x 241 mm) |
Paper types |
Plain bond paper, air mail |
Thickness |
0.16 mm to 0.52 mm (0.006 to 0.02 inch) |
Weight |
45 g/m2 (12 lb) to 75 g/m2 (20 lb) |
Index cards:
Size |
A6 (105 mm x 148 mm) |
Paper types |
Special papers distributed by EPSON |
Transparencies, glossy film, glossy paper:
Size |
A4 (210 mm x 297 mm) * for glossy film |
Paper types |
Special papers distributed by EPSON |
Self adhesive sheets:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Special papers distributed by EPSON |
Photo paper:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Special papers distributed by EPSON |
Photo Stickers:
Size |
A6 (105 mm x 148 mm) with 4 or 16 frames |
Paper types |
Special paper distributed by EPSON |
Matte Paper-Heavyweight:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Special papers distributed by EPSON |
Note: |
|
|
|
|
Single sheets (including panoramic size) and index cards
Envelopes
A |
The minimum top margin is 3.0 mm (0.12"). When loading multiple sheets of EPSON Photo Quality Glossy Film, the minimum top margin is 30.0 mm (1.2"). |
B-L |
The minimum left margin is 3.0 mm (0.12"). |
B-R |
The minimum right margin is as follows: |
C |
The minimum bottom margin is 14.0 mm (0.55"). |
|
You can extend the minimum bottom margin to 3 mm by selecting Maximum as the Printable Area setting on the printer driver's Paper menu (for Windows) or Page Setup dialog box (for Macintosh). However, print quality may decline in the expanded area. Before printing large jobs using this setting, print a single sheet to confirm printout quality. |
Note: |
Always load paper into the sheet feeder short edge first. Load envelopes flap edge first with the flap side down. |
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |