|
|
Product Information / Printer Specifications
Paper specifications
Printable area
Note: |
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs. |
Single sheets:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Plain bond paper, special papers distributed by EPSON |
Thickness |
0.08 mm to 0.11 mm (0.003 to 0.004 inch) |
Weight |
64 g/m2 (17 lb) to 90 g/m2 (24 lb) |
Envelopes:
Size |
No. 10 (104.8 mm x 241 mm) |
Paper types |
Plain bond paper, air mail |
Thickness |
0.16 mm to 0.52 mm (0.006 to 0.02 inch) |
Weight |
45 g/m2 (12 lb) to 75 g/m2 (20 lb) |
Index cards:
Size |
A6 (105 mm x 148 mm) |
Paper types |
Special papers distributed by EPSON |
Transparencies, glossy film:
Size |
A4 (210 mm x 297 mm) * for glossy film |
Paper types |
Special papers distributed by EPSON |
Self-adhesive sheets:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Special paper distributed by EPSON |
Matte Paper-Heavyweight:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Special papers distributed by EPSON |
Photo paper:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Special papers distributed by EPSON |
Photo Stickers:
Size |
A6 (105 mm x 148 mm) with 4 or 16 frames |
Paper types |
Special paper distributed by EPSON |
Note: |
|
|
|
Single sheets (including panoramic size) and index cards
Envelopes
A: |
The minimum top margin is 3.0 mm (0.12"). When loading multiple sheets of EPSON Photo Quality Glossy Film, the minimum top margin is 30.0 mm (1.2"). |
B-L: |
The minimum left margin is 3.0 mm (0.12"). |
B-R: |
The minimum right margin is 3.0 mm (0.12"). |
C: |
The minimum bottom margin is 14.0 mm (0.55"). When printing near the minimum bottom margin, some colors may not be printed properly. If this occurs, try increasing the bottom margin. |
: |
You can extend the minimum bottom margin to 3 mm by selecting Maximum as the Printable Area setting on the printer driver's Paper menu. However, print quality may decline in the expanded area. Before printing large jobs using this setting, print a single sheet to confirm printout quality. |
Note: |
Always load paper into the sheet feeder short edge first. Load envelopes flap edge first with the flap side down. |
Previous |
Next |
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |