|
|
Product Information / Printer Specifications
For PCs
For Macintosh computers
To use your printer, you need Microsoft® Windows® 3.1, Windows® 95, Windows® 98, or Windows® NT 4.0; and a shielded, twisted-pair parallel cable. If you want to connect your printer to a USB port, you need a Windows 98 pre-installed PC equipped with a USB port; and a shielded USB cable.
Your computer should also meet the following system requirements.
Minimum System Requirements |
Recommended System |
i386/25 MHz for Windows 3.1 |
Pentium or higher processor |
16 MB RAM |
32 MB RAM or more for Windows 3.1, 95 and 98 |
10 MB hard disk space for Windows 3.1, 95 and 98 |
50 MB or more free disk space for Windows 3.1, 95 and 98 |
VGA monitor |
VGA or better monitor |
Your computer dealer can help you update your system if it does not meet these requirements.
To connect this printer to Apple® Macintosh® computers, you must use a USB cable.
Your Macintosh must also meet the following system requirements.
Minimum System Requirements |
Recommended System |
Mac OS 8.1 |
Mac OS 8.5.1 or later |
6 MB of available memory |
13 MB or more of available memory |
Note: |
|
|
In addition to these system and memory requirements, you also need 10 MB of free hard disk space to install your printer software. To print, you need extra hard disk space amounting to about twice the size of the file you want to print.
Previous |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |