|
|
Product Information / Printer Specifications
Paper specifications
Printable area
Note: |
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs. |
Single sheets:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Plain bond paper, special paper distributed by EPSON |
Thickness |
0.08 mm to 0.11 mm (0.003 to 0.004 inch) |
Weight |
64 g/m2 (17 lb) to 90 g/m2 (24 lb) |
Envelopes:
Size |
No. 10 (104.8 mm x 241 mm) |
Paper types |
Plain bond paper, air mail |
Thickness |
0.16 mm to 0.52 mm (0.006 to 0.02 inch) |
Weight |
45 g/m2 (12 lb) to 75 g/m2 (20 lb) |
Index Cards:
Size |
A6 (105 mm x 148 mm)
5 x 8" (127 mm x 203 mm) |
Paper types |
Special paper distributed by EPSON |
Transparencies:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Special paper distributed by EPSON |
Premium Glossy Photo Paper:
Size |
Letter (216 mm x 279 mm) A4 (210 mm x 297 mm) |
Paper types |
Special paper distributed by EPSON |
Premium Semigloss Photo Paper:
Size |
Letter (216 mm x 279 mm) A4 (210 mm x 297 mm) |
Paper types |
Special paper distributed by EPSON |
Matte Paper-Heavyweight:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Special paper distributed by EPSON |
Archival Matte Paper:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Special paper distributed by EPSON |
Double Sided Matte Paper:
Size |
A4 (210 mm x 297 mm) |
Paper types |
Special paper distributed by EPSON |
Note: |
|
|
|
Single sheets (including panoramic size) and index cards
Envelopes
A: |
The minimum top margin is 3.0 mm (0.12"). |
B-L: |
The minimum left margin is 3.0 mm (0.12"). |
B-R: |
The minimum right margin is 3.0 mm (0.12"). |
C: |
The minimum setting of the bottom margin is 14.0 mm (0.55") for single sheets (including panoramic size) and index cards. The minimum setting of the bottom margin for envelopes is 20.0 mm (0.78"). When printing near the minimum bottom margin, some colors may not be printed properly. If this occurs, try increasing the bottom margin. |
: |
You can extend the minimum bottom margin to 3 mm by selecting Maximum as the Printable Area setting on the printer software's Paper menu (Windows) or in the Page Setup dialog box (Macintosh). However, print quality may decline in the expanded area. Before printing large jobs using this setting, print a single sheet to confirm printout quality. |
Note: |
Always load paper into the sheet feeder short edge first. Load envelopes flap edge first with the flap side down. |
Previous |
Next |
Version 1.10E, Copyright © 2002, SEIKO EPSON CORPORATION |