Reference Guide
|
|
Safety Instructions
Information for United Kingdom Users
Use of options
Safety information
Use of options
EPSON (UK) Limited shall not be liable against any damages or problems arising from the use of any options or consumable products other than those designated as Original EPSON Products or EPSON Approved Products by EPSON (UK) Limited.
[Top]
Safety information
|
Warning:
|
|
This appliance must be earthed. Refer to the rating plate for the voltage and check that the appliance voltage corresponds to the supply voltage.
Important:The wires in the mains lead fitted to this appliance are coloured in accordance with the following code:
Green and yellow Earth Blue Neutral Brown Live
|
|
If you have to fit a plug:
As the colours of the mains lead of this appliance may not match the coloured markings used to identify the terminals in a plug, please observe the following:
-
The green and yellow wire must be connected to the terminal in the plug which is marked with the letter E or the earth symbol ().
-
The blue wire must be connected to the terminal in the plug marked with the letter N.
-
The brown wire must be connected to the terminal in the plug marked with the letter L.
-
If the plug is damaged, replace the cord set or consult a qualified electrician.
-
Replace fuses only with fuses of the correct size and rating.
[Top]
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |