|
|
Other Information / Printer Specifications
Using the printer
Using the Reference Guide and Photo Print Software Setup
Refer to the appropriate section below for the minimum and recommended computer system requirements necessary to use this printer.
To use your printer, you need to have Microsoft® Windows® XP, Me, 98, or 2000 installed.
USB connection:
To connect your printer via a standard, shielded USB 1.1 cable, you need a Windows XP, 98, or 2000 pre-installed PC equipped with a USB port. For Windows Me users, your PC must be a Windows Me pre-installed model or upgraded from a Windows 98 pre-installed model.
Your computer should also meet the following system requirements.
Minimum System Requirements |
Recommended System |
Pentium 233 MHz processor for Windows XP Pentium 166 MHz processor for Windows Me, 98, and 2000 |
Pentium 300 MHz or higher for Windows XP
Pentium 166 MHz or higher processor for |
64 MB RAM for Windows XP, Me, 98 and 2000 |
128 MB RAM or more for Windows XP, Me, 98 and 2000 |
150 MB hard disk space for Windows XP, Me, 98, and 2000 |
150 MB hard disk space or more for Windows XP, Me, 98, and 2000 |
SVGA monitor for Windows XP, Me, 98, and 2000 |
SVGA monitor or better for Windows XP, Me, 98, and 2000 |
Your computer dealer can help you update your system if it does not meet these requirements.
Refer to the appropriate section below for the minimum system requirements necessary to use the Reference Guide and Photo Print Software Setup.
System |
Microsoft Windows® Millennium Edition, 98, XP or 2000 |
CPU |
Pentium 233 MHz processor for Windows XP Pentium 166 MHz processor for Windows Me, 98, and 2000 |
Memory |
64 MB RAM for Windows XP, Me, 98 and 2000 |
Hard disk space |
7 MB to install the Reference Guide and Photo Print Software Setup |
CD-ROM drive |
Double-speed |
Display |
640 x 480 pixel or 800 x 600 pixel resolution, with High Color (16 bit) or True Color (32 bit) setting |
Browser |
Web browser |
Previous |
Next |
Version NPD0629-01, Copyright © 2004, SEIKO EPSON CORPORATION |