Reference Guide

Index	Search	Glossary

Contents	Help

Improving Print Quality

Checking the Print Head Nozzles

Using the Nozzle Check utility
Using the control panel buttons

If you find that the printout is unexpectedly faint or that dots are missing, you may be able to identify the problem by checking the print head nozzles.

You can check the print head nozzles from your computer using the Nozzle Check utility in the printer software or from the printer itself by using the printer's control panel buttons.

Using the Nozzle Check utility

Follow the steps below to use the Nozzle Check utility.

Make sure that A4 or Letter size paper is loaded in the sheet feeder.

Access the printer software.

Accessing the Printer Software

Click the Maintenance tab, then click the Nozzle Check button.

Follow the on-screen instructions.

[Top]

Using the control panel buttons

Follow the steps below to check the print head nozzles using the control panel buttons.

Turn off your printer.

Make sure that A4 or Letter size paper is loaded in the sheet feeder.

Hold down the maintenance button and the power button to turn on the printer.

Release only the power button when the printer turns on. When the nozzle check starts, release the maintenance button also.

Below are two sample nozzle check patterns.

Good sample

Print head needs to be cleaned

If the nozzle check page does not print satisfactorily, there is a problem with the printer. This could be a clogged ink nozzle or a misaligned print head.
See Cleaning the Print Head
See Aligning the Print Head

[Top]