|
|
How to Print
Handling paper
Driver settings for Windows
Driver settings for Mac OS X
This section guides you through the procedures for basic printing from the printer driver.
Note: |
|
Refer to the section below for details on loading paper.
Loading Paper |
| Open the file you want to print. |
| Access the printer driver. |
Accessing the Printer Driver for Windows |
| Click the Main tab, and select Borderless for your print layout. |
|
Make the appropriate Color Option and Quality settings. See the following section for details on the print settings. |
| Select Portrait (tall) or Landscape (wide) to change the orientation of your printout. |
| Click OK to close the printer driver settings dialog box. |
| Print your data. After finishing all steps above, start printing. Print one test copy and examine the results before printing an entire job. |
| Remove each sheet from the output tray as it is printed. |
| Open the file you want to print. |
| Access the Page Setup dialog box. |
Accessing the Printer Driver for Mac OS X |
| Select PictureMate 2005 as the Format for setting. |
| Select 4 x 6 in (Borderless) for Paper Size and make Orientation settings. |
| Click OK to close the Page Setup dialog box. |
| Access the Print dialog box. |
Accessing the Printer Driver for Mac OS X |
| Select PictureMate 2005 as the Printer setting. Then make the Copies & Pages settings. |
Note: |
|
| Select Print Settings from the pop-up menu. |
|
Make the appropriate Quality and Color Option settings. |
| Click Print to start printing. |
Note: |
|
| Remove each sheet from the output tray as it is printed. |
Previous |
Version NPD1419-00, Copyright © 2005, SEIKO EPSON CORPORATION |