Reference Guide

Index
Search
Glossary
Contents
Help

Improving Print Quality

Checking the Print Head Nozzles

Using the Nozzle Check utility
Using the control panel buttons

If you find that the printout is unexpectedly faint or that dots are missing, you may be able to identify the problem by checking the print head nozzles.

You can check the print head nozzles from your computer using the Nozzle Check utility in the printer software or from the printer itself by using the printer's control panel buttons.

Note:
You cannot clean the print head if the message "ink out" is displayed or the ink icon flashes to show ink out or ink low on the LCD panel. Replace the photo cartridge first.

Using the Nozzle Check utility

Refer to the appropriate section below to use the Nozzle Check utility.

For Windows

Follow the steps below to use the Nozzle Check utility.

Make sure that the printer is turned on and no warnings or errors are displayed on the LCD panel.

Make sure that paper is loaded in the paper feeder.

Access the printer software.
Accessing the Printer Software for Windows

Click the Maintenance tab, then click the Nozzle Check button.

Follow the on-screen instructions.

For Mac OS 9

Follow the steps below to use the Nozzle Check utility.

Make sure that the printer is turned on and no warnings or errors are displayed on the LCD panel.

Make sure that paper is loaded in the paper feeder.

Access the Print or Page Setup dialog box.
Accessing the Printer Software for Mac OS 9

Click the  Utility icon button, then click the Nozzle Check button in the Utility dialog box.

Follow the on-screen instructions.

For Mac OS X

Follow the steps below to use the Nozzle Check utility.

Make sure that the printer is turned on and no warnings or errors are displayed on the LCD panel.

Make sure that paper is loaded in the paper feeder.

Access the EPSON Printer Utility dialog box.
Accessing the Printer Software for Mac OS X

Select your printer, then click OK in the Printer List window.

Click the Nozzle Check button in the Utility dialog box.

Follow the on-screen instructions.


[Top]

Using the control panel buttons

Follow the steps below to check the print head nozzles using the control panel buttons.

Make sure that the printer is turned on and no warnings or errors are displayed on the LCD panel.

Make sure that paper is loaded in the paper feeder.

Press the or button to select More Options, then press OK.

Press the or button to select Maintenance, then press OK button.

Press the button to position the cursor at Nozzle Check and press the OK button.

Follow the instructions displayed in the LCD panel and press the OK button.

The nozzle check pattern is printed out. See the following illustration. If it is necessary to clean the print head, press the OK button, then select Clean Print Head.

The printer will print a nozzle check pattern. Below are sample printouts.

  Good sample

  Print head needs to be cleaned

If the nozzle check page does not print satisfactorily (for example, if any segment of the printed lines is missing), there is a problem with the printer. This could be a clogged ink nozzle or a misaligned print head.
See Cleaning the Print Head
See Aligning the Print Head


[Top]


Previous

Next
Version NPD0552-01, Copyright © 2004, SEIKO EPSON CORPORATION