 |
 |
|
||
 |
||||
Checking or Confirming
When the network setup is changed, it takes about 30 to 60 seconds to reflect the setup changes. (The time until changes are reflected varies depending on the setting method, the wireless router or access point, and so on.)
Confirming the network status
When the settings are complete, verify that the printer is connected to the network.
 |
Load a plain paper into the sheet feeder.
|
 |
Press
 to print the status sheet. |
Ping Command
In the TCP/IP network environment, confirm the IP addresses set on the computer and printer, then check whether communication is established between the computer and printer.
Confirming in Windows 7/Vista/XP
|
Check the printer’s IP address.
|
The IP address can be checked on a network status sheet.
To check on a network status sheet, see Confirming the network status.
|
Click the Start button or Start, All Programs or Programs, Accessories, and then Command Prompt.
|
 |
Type ‘ping’, a space, and ‘<the printer’s IP address>’, then press the Enter key.
|
 |
If a communication is established, Reply from <the printer’s IP address> is displayed.
|
If communication is not established, Destination host unreachable or Request timed out is displayed. Check the device’s network settings on the computer.
Confirming in Mac OS X
|
Confirm the printer’s IP address.
|
The IP address can be checked on a network status sheet. See Confirming the network status.
|
Double-click Macintosh HD, Applications, Utilities, and then Network Utility.
|
|
Click the Ping tab.
|
|
Enter the printer’s IP address in the network address field.
|
 |
Click Ping.
|
 |
If communication is established, all signals are returned and 0% packet loss is displayed.
|
If communication is not established, no signal is returned, and 100% packet loss. Check the device’s network settings on the computer.