Reference Guide

Index	Search	Glossary

Contents	Help	Safety

Options and Consumables

Print Server

Setting the IP address from the control panel

You can use this printer as a network printer by installing a print server in the printer's parallel interface port. See the Administrator's Manual packaged with this option for instructions on installation and use.

The following Printer Servers can be used:

EpsonNet 10/100 Base Tx Int. Print Server 5 (C82434)

Setting the IP address from the control panel

Follow the steps below to get the IP address using the control panel.

Turn on the printer.

Press the Menu (Tear Off and Top of Form) buttons to enter the SelecType mode.

Press the Item (Font) or Item (Pitch) button to select the Get IP address setting and set the setting to Panel using the Set (Tear Off) or Set (Top of Form) button.

Press the Item (Pitch) button to select the IP byte 1.

Change the number for the IP byte 1 using the Set (Tear Off) or Set (Top of Form) button.

Press the Item (Pitch) button to select the next byte and change the number using the Set (Tear Off) or Set (Top of Form) button.

Repeat step 6 until the number for the IP byte 4 is set.

Set the numbers for SM byte 1 to 4 and GW byte 1 to 4 in the same way as the IP byte 1 to 4.

Confirm the numbers that you selected for the IP byte 1 to 4, SM byte 1 to 4, and GW byte 1 to 4 are correctly set.

When you finish making settings, press the Menu (Tear Off and Top of Form) buttons.

The LCD displays Save Setting. If you want to save the settings, select Yes by pressing the Set (Tear Off) button. If you do not want to save the settings, select No by pressing the Set (Top of Form) button.

Turn off the printer.

[Top]