Reference Guide

Index	Search	Glossary

Contents	Help

Product Information / Technical Specifications

Printer

General
Environmental
Mechanical
Electrical
Standards and approvals
PostScript

General

Printing method:	Laser beam scanning and dry electrophotographic process
Resolution:	600 dpi, 300dpi
Continuous printing speed* (with A4/Letter):	34 pages per minute or less
First print (with A4/Letter):	Less than 8.7 seconds from the MP tray Less than 8.7 seconds from the standard cassette
Warm-up time:	About 25 seconds or less at normal temperature (about 17 seconds or less from the sleep mode)
Paper feed:	Automatic or manual feed
Paper feed alignment:	Center alignment for all sizes
Input paper supply:
MP tray:	Up to 150 sheets of plain paper Up to 20 sheets of envelopes Up to 100 sheets of labels, and transparencies Up to 60 sheets of thick paper (Total thickness: 17.5 mm maximum)
Standard cassette:	Up to 550 sheets of plain paper Up to 80 sheets of envelopes Up to 290 sheets of labels Up to 160 sheets of thick paper Up to 100 sheets of transparencies
Paper output capacity:
Face-down tray	Up to 500 sheets
Face-up tray	Up to 70 sheets
Internal emulation:	HP listed LaserJet 4 emulation (LJ4 mode)
	HP-GL/2 emulation (GL2 mode)
	ESC/P2 24-pin printer emulation (ESCP2 mode)
	ESC/P 9-pin printer emulation (FX mode)
	IBM Proprinter emulation (I239X mode)
	PostScript 3
	PCL6
Resident fonts:	84 scalable fonts, and 7 bitmap fonts
RAM:	64 MB, expandable up to 256 MB

[Top]

Environmental

Temperature:	In use:	5 to 35°C (41 to 95°F)
	Not in use:	-20 to 40°C (-4 to 104°F)
Humidity:	In use:	15 to 85% RH
	Not in use:	5 to 85% RH
Altitude:	3,500 meters (11,483.5 feet) or less

[Top]

Mechanical

Dimensions and weight:	Height:	428.0 mm (16.9 in.)
	Width:	468.0 mm (18.4 in.)
	Depth:	404.0 mm (15.9 in.)
	Weight:	Approx. 20.9 kg (46.1 lb) without consumable installed
Durability:	Printing Volume: Maximum 150,000 sheets/month Average 10,000 sheets/month

[Top]

Electrical

			110 V to 120 V Model (Model JEA-2)	220 to 240 V Model (Model JEB-2)
Voltage			110 V-120 V ± 10%	220 V-240 V ± 10%
Rated frequency			50 Hz / 60 Hz ± 3 Hz	50 Hz / 60 Hz ± 3 Hz
Rated current			9.8 A	4.9 A
Power consumption	During printing*	Maximum	945 W@110V	959 W@220V
		Average	539 Wh	538 Wh
	During standby mode Average		78 Wh	76 Wh
	Sleep mode		7 Wh	10 Wh

* Includes optional cassette unit.

[Top]

Standards and approvals

U.S. model:

Safety	UL 60950 CSA No.60950
EMC	FCC Part 15 Subpart B Class B CSA C108.8 Class B

European model:

Low Voltage Directive 73/23/EEC
EMC Directive 89/336/EEC

EN 60950
EN 60825-1
EN 55022 Class B
EN 55024
EN 61000-3-2
EN 61000-3-3

Australian model:

EMC	AS/NZS 3548 Class B

Laser safety

This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation.

Since radiation emitted by the laser is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.

CDRH regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.

[Top]

PostScript

Language	Adobe PostScript 3
Emulation name	in PJL: POSTSCRIPT in EJL: PS
AppleTalk protocol	Entity Type: LaserWriter Emulation Type: POSTSCRIPT-00

[Top]