Administrator's Guide

						Index				Search

						Contents				Help

Introduction

About EpsonNet WinAssist/MacAssist/WebAssist

System requirements

EpsonNet WinAssist, MacAssist, and WebAssist are software designed to configure the printer for use on a network. The following are features of EpsonNet WinAssist, MacAssist, and WebAssist.

EpsonNet WinAssist is configuration utility software for administrators for Windows that allows you to configure the Internal Print Server for TCP/IP, NetWare, AppleTalk, and NetBEUI.

The EpsonNet MacAssist is configuration utility software for administrators for Macintosh that allows you to configure the Internal Print Server for TCP/IP and AppleTalk.

From EpsonNet WinAssist and MacAssist, you can start EpsonNet WebAssist, the web-based configuration utility that allows you to configure the Internal Print Server for TCP/IP, NetWare, AppleTalk, and NetBEUI.

From EpsonNet WebAssist, you can make many of the same settings you can make with the printer's control panel. You can also obtain information about the printer status and consumables.

SNMP settings such as SNMP community, IP trap, and IPX trap settings are available with EpsonNet WebAssist.

Before using the EpsonNet Internet Print utility, you need to set the IPP settings with EpsonNet WebAssist. Settings can be made without changing the default printer name.

System requirements

Windows

System:	i486 (Pentium or better recommended) Windows 98/95 Windows 2000 Server & Professional Windows NT 4.0/3.51 Server & Workstation
Memory:	8MB (for Windows 98/95) 16MB (for Windows 2000/NT 4.0/NT 3.51)
Hard disk space:	8MB

Macintosh

System:	Macintosh with 68030 or better processor System 7.5.1 or later
Memory:	6MB
Hard disk space:	13MB

Browser

Microsoft Internet Explorer version 4.01 or later

Netscape Navigator version 4.05 or later

Note:

For Windows NT 4.0 users: If you have not yet upgraded with Windows NT Service Pack 3, install the Windows NT Service Pack before installing Microsoft Internet Explorer.

[Top]