Reference Guide

Index Search Glossary Contents Help

Problem Solver

Resetting the Printer

Reset
Reset All

There are two ways to reset (return to a fixed set of conditions) the printer.

Reset

You can perform a Reset to reset the settings for the current emulation mode and interface by holding down the ALT and Continue buttons on the control panel until the Paper, Toner and Memory indicator lights come on. You can reset the printer anytime a print job is not being sent to it through the active interface.

[Top]

Reset All

Performing a Reset All will reset the settings for all emulation modes and interfaces. A Reset All is carried out by holding down the ALT and Continue buttons for 5 seconds, and is successfully completed when all the lights turn on. You can also reset all emulation modes and interfaces by turning the printer off and back on again.

Note:

Reset All clears all print jobs received from all interfaces; be careful not to disrupt someone else's print job.

[Top]