User's Guide

Index	Search	Glossary

Contents	Help	Safety

Using the Control Panel

Canceling a Job

Canceling printing
Canceling scanning
Canceling copying
Canceling faxing

Canceling printing

You can cancel printing from your computer by using the printer driver.

To cancel a print job before it is sent from your computer, see Canceling Printing (for Windows) or Canceling Printing (for Macintosh).

Using the Cancel button

The Cancel button on your product is the quickest and easiest way to cancel printing. Pressing this button cancels the currently printing job. Pressing and holding the Cancel button for more than three seconds deletes all jobs from the product memory, including jobs the product is currently receiving or printing.

Using the Reset Menu settings

Selecting Reset from the Setup menu stops printing clears the print job being received from the active interface, and clears errors that may have occurred at the interface.

Follow the steps below to use the Reset menu.

Press the Setup button to enter the Setup menu.

Make sure Printer Settings is selected, and then press the Right button.

Press the Up or Down button several times until Reset Menu is selected, then press the Right button.

Press the Down button twice to select Reset.

Press the Right button.

Printing is canceled.
The Print mode screen appears in the LCD panel, and the product is ready to receive a new print job.

[Top]

Canceling scanning

When you press the Cancel button on the control panel, a scanning job in Scan mode is canceled or the TWAIN processing is stopped.

[Top]

Canceling copying

When you press the Cancel button while scanning in Copy mode, the LCD panel shows Cancel Print Job and the copy job is canceled.

[Top]

Canceling faxing

Using the Cancel button

When you press the Cancel button while scanning in Fax mode, the LCD panel shows Cancel Print Job and the fax job is canceled.

Using the Fax Settings menu

This function is used to cancel the fax transmission job stored in the memory.

Make sure that the product is in Fax mode. If not, press the Fax button to enter the Fax mode.

Press the Advanced/Menu button.

Press the Down button to select Fax Job Information, and then press the Right button.

Press the Down button to select Fax Transmission Job, and then press the Right button.

The FAX Transmission Job list is displayed.

Note:

To cancel the receiving fax job stored in the memory, press the Up or Down button several times until FAX Reception Job is selected and press the Right button. Then select the incoming fax you want to cancel from the FAX Reception Job list.

Press the Up or Down button to select the fax job you want to cancel, and then press the Reset button.

Press the Up or Down button to select Yes for confirmation, and then press the Right button

[Top]