Reference Guide

Index
Search
Glossary
Contents
Help

Problem Solver

Correcting USB Problems

Make sure that your computer is a Windows 98 or Windows 2000 pre-installed model
Make sure that EPSON USB Printer Devices appears in the list on the Device Manager menu (for Windows 98 only)
Printer does not work correctly with a USB cable

Make sure that your computer is a Windows 98 or Windows 2000 pre-installed model

Your computer must be a Windows 98 or Windows 2000 pre-installed model. You may not be able to install or run the USB Printer Driver on a computer which is not equipped with a USB port or which has been upgraded from Windows 95 to Windows 98 or 2000.

For details about your computer, contact your dealer.


[Top]

Make sure that EPSON USB Printer Devices appears in the list on the Device Manager menu (for Windows 98 only)

If you canceled the plug-and-play driver installation before the procedure was completed, either the USB printer device driver or the printer driver may be installed incorrectly.

Follow the steps below to check the installation and reinstall the drivers.

Turn the printer on. Plug the USB cable into the printer and the computer.

Right-click the My Computer icon on your desktop, then click Properties in the shortcut menu that appears.

Click the Device Manager tab.

If your drivers are correctly installed, EPSON USB Printer Devices should appear in the list on the Device Manager menu.

If EPSON USB Printer Devices does not appear in the list, click the plus (+) sign beside Other Devices to view the installed devices.

If USB Printer appears under Other Devices, the USB printer device driver is not installed correctly. If EPSON Stylus COLOR 980 appears, the printer driver is not installed correctly.

If neither USB Printer nor EPSON Stylus COLOR 980 appears under Other Devices, click Refresh or unplug the USB cable from the printer, then plug it into the printer again.

Under Other Devices, select USB Printer or EPSON Stylus COLOR 980, then click Remove. Then click OK.

When the following dialog box appears, click OK. Then click OK again to close the Properties window.

Turn off both the printer and the PC. Then, install the drivers again, following the instructions in the Setup Guide.


[Top]

Printer does not work correctly with a USB cable

If your printer does not work correctly with a USB cable, try one or more of these solutions:


[Top]


Next
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION