|
||||||||||||
![]() |
Paper Does Not Feed CorrectlyPaper does not feedRemove the stack of paper and make sure of the following:
You have inserted the paper cassette all the way into the printer.
The paper is not curled or creased.
The paper is not too old. See the instructions that came with the paper for more information.
For plain paper, do not load paper above the
![]() For Epson special media, make sure the number of sheets is less than the limit specified for the media. ![]() The ink cartridges are not expended. If a cartridge is expended, replace it.
![]() You have followed any special loading instructions that came with your paper. Load the paper again.
![]() The paper does not have any binder holes.
Multiple pages feedFor plain paper, do not load paper above the
![]() For Epson special media, make sure the number of sheets is less than the limit specified for the media. ![]() Make sure the edge guides are snug against the edges of the paper.
Make sure the paper is not curled or folded. If so, flatten it or curl it slightly toward the opposite side before loading.
Remove the stack of paper and make sure that the paper is not too thin.
For details on paper thickness, click the Appendix tab in the upper right corner of the User’s Guide window. Then click Product Information and Technical Specifications. Fan the edges of the stack to separate the sheets, then reload the paper.
If too many copies of a file are being printed, check the Copies setting in your printer driver as follows, and also check in your application.
For Windows, check the Copies setting on the Main window. For Mac OS X 10.4, check the Copies setting in the Copies & Pages setting in the Print dialog box. For Mac OS X 10.5 or later, check the Copies setting in the Print dialog box. Paper is improperly loadedIf you have loaded the paper too far into the printer, the printer cannot feed the paper correctly. Turn the printer off and gently remove the paper. Then turn the printer on and reload the paper correctly.
Paper is not ejected fully or is wrinkledIf the paper does not eject fully, press
![]() ![]() If the paper is wrinkled when it comes out, it may be damp or too thin. Load a new stack of paper.
![]()
| ![]() |
||||||||||