EPSON

Technical Specifications

Printer specifications

Paper path
Sheet feeder, top entry
Capacity
12 mm (0.5 in.) *1 *2
*1 For Legal and User Defined sizes, load one sheet at a time.
*2 Paper with a weight of 64 to 90 g/m² (17 to 24 lb), or envelope with a weight of 75 to 90 g/m² (20 to 24 lb).

Paper

Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot attest to the quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
Poor quality paper may reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper.
Use paper under normal conditions:
Temperature 15 to 25 ˚C (59 to 77 ˚F)
Humidity 40 to 60% RH
Single sheets:
Size
A4 210 × 297 mm
10 × 15 cm (4 × 6 in.)
13 × 18 cm (5 × 7 in.)
A6 105 × 148 mm
A5 148 × 210 mm
B5 182 × 257 mm
9 × 13 cm (3.5 × 5 in.)
13 × 20 cm (5 × 8 in.)
20 × 25 cm (8 × 10 in.)
16:9 wide size (102 × 181 mm)
100 × 148 mm
Letter 8 1/2 × 11 in.
Legal 8 1/2 × 14 in.
Paper types
Plain paper or special paper distributed by Epson
Thickness
(for plain paper)
0.08 to 0.11 mm (0.003 to 0.004 in.)
Weight
(for plain paper)
64 g/m² (17 lb) to 90 g/m² (24 lb)
Envelopes:
Size
Envelope #10 4 1/8 × 9 1/2 in.
Envelope DL 110 × 220 mm
Envelope C6 114 × 162 mm
Paper types
Plain paper
Weight
75 g/m² (20 lb) to 90 g/m² (24 lb)

Printable area

Highlighted portions show printable area.
Single sheets:
Normal
Borderless
Envelopes:
 
Minimum margin
Media type
Single sheets
Envelopes
A
3.0 mm (0.12 in.)
3.0 mm (0.12 in.)
B
3.0 mm (0.12 in.)
5.0 mm (0.20 in.)
C
3.0 mm (0.12 in.)
20 mm (0.78 in.)
Note:
Depending on the type of paper, print quality may decline in the top and bottom areas of the printout, or the area may be smeared.

Scanner specifications

Note:
Specifications are subject to change without notice.
Scanner type
Flatbed color
Photoelectric device
CIS
Effective pixels
10,200 × 14,040 pixels at 1200 dpi
Scanning area may be restricted if resolution setting is large.
Document size
216 × 297 mm (8.5 × 11.7 inches) A4 or US letter size
Scanning resolution
1200 dpi (main scan)
2400 dpi (sub scan)
Output resolution
50 to 4800, 7200, and 9600 dpi
(50 to 4800 dpi in 1 dpi increments)
Image data
16 bits per pixel per color internal
8 bits per pixel per color external (maximum)
Light source
LED

Automatic document feeder specifications

Paper input
Face-up loading
Paper output
Face-down ejection
Paper size
A4, Letter, Legal
Paper types
Plain paper
Paper weight
75 to 95 g/m²
Paper capacity
Total thickness of 3 mm, up to about 30 sheets (Letter, A4)
10 sheets (Legal)

Fax specifications

Fax type
Walk-up black and white and color fax capability
Support line
Household phone line
Speed
Up to 33.6 kbps
Resolution
Monochrome
Standard: 203 × 98 dpi
Fine: 203 × 196 dpi
Photo: 203 × 196 dpi
Color
Fine: 200 × 200 dpi
Photo: 200 × 200 dpi
Error correction mode
CCITU/ITU Group 3 fax with error correction mode
Speed dial numbers
Up to 60
Page memory
Up to 180 pages (ITU-T No.1 chart)
Redial
2 times (with 1 minute interval)
Interface
RJ-11 Phone Line
RJ-11 Telephone set connection

Network Interface Specification

Wireless LAN is available only with the BX305FW/BX320FW/WorkForce 325/WorkForce 525, and wired LAN is available only with the BX320FW/WorkForce 525.
Wireless LAN
Standard:
IEEE 802.11b/g/n*
Security:
WEP (64/128bit),
WPA-PSK (TKIP/AES) WPA2 compliant
Frequency Band:
2.4 GHz
Communication Mode:
Ad hoc mode,
Infrastructure mode
Wired LAN
Standard:
Ethernet 100BASE-TX/10 BASE-T
* Complies with either IEEE 802.11b/g/n or IEEE 802.11b/g depending on location of purchase.

Mechanical

 
BX305F/620F/WorkForce 320
BX320FW/WorkForce 525
Dimensions
Storage
Width: 460 mm (18.1 inches)
Depth: 411 mm (16.2 inches)
Height: 235 mm (9.3 inches)
Storage
Width: 460 mm (18.1 inches)
Depth: 403 mm (15.9 inches)
Height: 235 mm (9.3 inches)
Printing
Width: 460 mm (18.1 inches)
Depth: 541 mm (21.3 inches)
Height: 303 mm (11.9 inches)
Printing
Width: 460 mm (18.1 inches)
Depth: 541 mm (21.3 inches)
Height: 303 mm (11.9 inches)
Weight
Approx. 7.1 kg (15.7 lb)*
Approx. 7.4 kg (16.3 lb)*
* Without the ink cartridges and the power cord

Electrical

BX305F/620F/WorkForce 320
 
100-120 V Model
220-240 V Model
100-240 V Model
Input voltage range
90 to 132 V
198 to 264 V
90 to 264 V
Rated frequency range
50 to 60 Hz
Input frequency range
49.5 to 60.5 Hz
Rated current
0.5 A
0.25 A
0.5 to 0.25 A
Power consumption
Standalone copying
Approx. 10 W (ISO/IEC24712)
Approx. 10 W (ISO/IEC24712)
Approx. 11 W (ISO/IEC24712)
Ready mode
Approx. 5.0 W
Approx. 5.0 W
Approx. 5.0 W
Sleep mode
Approx. 2.2 W
Approx. 2.2 W
Approx. 2.4 W
Power off
Approx. 0.2 W
Approx. 0.3 W
Approx. 0.6 W
BX320FW/WorkForce 525
 
100-120 V Model
220-240 V Model
Input voltage range
90 to 132 V
198 to 264 V
Rated frequency range
50 to 60 Hz
Input frequency range
49.5 to 60.5 Hz
Rated current
0.5 A
0.25 A
Power consumption
Standalone copying
Approx. 15 W (ISO/IEC24712)
Approx. 15 W (ISO/IEC24712)
Ready mode
Approx. 6.0 W
Approx. 6.0 W
Sleep mode
Approx. 4.0 W
Approx. 4.0 W
Power off
Approx. 0.2 W
Approx. 0.4 W
Note:
Check the label on the back of the printer for its voltage.

Environmental

Temperature
Operation:
10 to 35 ˚C (50 to 95 ˚F)
Storage:
-20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
Humidity
Operation:*
20 to 80% RH
Storage:* 5 to 85% RH
* Without condensation

Standards and approvals

BX305F/620F/WorkForce 320
U.S. model:
Safety
UL60950-1
CAN/CSA-C22.2 No.60950-1
EMC
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
European model:
Low voltage directive 2006/95/EC
EN60950-1
EMC directive 2004/108/EC
EN55022 Class B
EN61000-3-2
EN61000-3-3
EN55024
R&TTE directive 1999/5/EC
TBR21
EN60950-1
For European users:
We, Seiko Epson Corporation, hereby declare that the equipment Model C364A is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
For use only in Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxemburg, Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Iceland, Cyprus, Greece, Slovenia, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia, and Malta.
Australian model:
EMC
AS/NZS CISPR22 Class B
BX305FW/BX320FW/WorkForce 325/WorkForce 525
U.S. model:
Safety
UL60950-1
CAN/CSA-C22.2 No.60950-1
EMC
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
This equipment contains the following wireless module.
Manufacture: Marvell Semiconductor Inc.
Type: SP88W8786-MD0-2C2T00
This product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
European model:
Low voltage directive 2006/95/EC
EN60950-1
EMC directive 2004/108/EC
EN55022 Class B
EN61000-3-2
EN61000-3-3
EN55024
R&TTE directive 1999/5/EC
EN300 328
EN301 489-1
EN301 489-17
TBR21
EN60950-1
For European users:
We, Seiko Epson Corporation, hereby declare that the equipment Models, C364B and C365A, are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
For use only in Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxemburg, Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Iceland, Cyprus, Greece, Slovenia, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia, and Malta.
Only indoor operation is permitted in France.
If used outside of own premises, general authorization is required in Italy.
Epson can not accept responsibility for any failure to satisfy the protection requirements resulting a non-recommended modification of the products.
Australian model:
EMC
AS/NZS CISPR22 Class B
Epson hereby declares that the equipment Models, C364B and C365A, are in compliance with the essential requirements and other relevant provisions of AS/NZS4771. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product.

Interface

USB 2.0 Hi-Speed (Device Class for computers)