 |
 |
|
||
 |
||||
Technical Specifications
Printer specifications
|
Paper path
|
Front paper cassette, front entry
|
|
Capacity
|
12mm (Paper with a weight of 64 g/m² (17 lb) to 90 g/m² (24 lb))
|
* For Legal and User Defined sizes, load one sheet at a time.
Paper
Note:|
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot attest to the quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
Poor quality paper may reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper.
Use paper under normal conditions:
Temperature 15 to 25 ˚C (59 to 77 ˚F) Humidity 40 to 60% RH |
Single sheets:
|
Size
|
A4 210 × 297 mm
10 × 15 cm (4 × 6 in.)
13 × 18 cm (5 × 7 in.)
A6 105 × 148 mm
A5 148 × 210 mm
B5 182 × 257 mm
9 × 13 cm (3.5 × 5 in.)
13 × 20 cm (5 × 8 in.)
20 × 25 cm (8 × 10 in.)
16:9 wide size (102 × 181 mm)
100 × 148 mm
Letter 8 1/2 × 11 in.
Legal 8 1/2 × 14 in.
|
|
Paper types
|
Plain paper or special paper distributed by Epson
|
|
Thickness
(for plain paper) |
0.08 to 0.11 mm (0.003 to 0.004 in.)
|
|
Weight
(for plain paper) |
64 g/m² (17 lb) to 90 g/m² (24 lb)
|
Envelopes:
|
Size
|
Envelope #10 4 1/8 × 9 1/2 in.
Envelope DL 110 × 220 mm
Envelope C6 114 × 162 mm
|
|
Paper types
|
Plain paper
|
|
Weight
|
75 g/m² (20 lb) to 90 g/m² (24 lb)
|
Printable area
Highlighted portions show printable area.
Single sheets:
|
Normal
|
Borderless
|
 |
 |
Envelopes:
|
Minimum margin
|
||
|
Media type
|
Single sheets
|
Envelopes
|
|
A
|
3.0 mm (0.12 in.)
|
3.0 mm (0.12 in.)
|
|
B
|
3.0 mm (0.12 in.)
|
5.0 mm (0.20 in.)
|
|
C
|
3.0 mm (0.12 in.)
|
20 mm (0.78 in.)
|
Note:|
Depending on the type of paper, print quality may decline in the top and bottom areas of the printout, or the area may be smeared.
|
CD/DVD:
|
12-cm CD/DVD
|
8-cm CD/DVD
|
 |
 |
|
A: 18 mm
|
|
B: 120 mm
|
|
C: 80 mm
|
Note:|
If you are printing in the following areas of the disc, the disc or the CD/DVD tray may get stained with ink.
|
Scanner specifications
Note:|
Specifications are subject to change without notice.
|
|
PX710W/TX710W Series
|
PX810FW/TX810FW Series
|
|
|
Scanner type
|
Flatbed color
|
|
|
Photo electric device
|
CIS
|
|
|
Effective pixels
|
20,400 x 28,080 pixels at 2400 dpi*
|
40,800 x 56,160 pixels at 4800 dpi*
|
|
Document size
|
216 × 297 mm (8.5 × 11.7 inches) A4 or US letter size
|
|
|
Scanning resolution
|
2400 dpi (main scan)
4800 dpi (sub scan)
|
4800 dpi (main scan)
4800 dpi (sub scan)
|
|
Output resolution
|
50 to 6400, 9600, and 12800 dpi
(50 to 6400 dpi in 1 dpi increments)
|
|
|
Image data
|
16 bits per pixel per color internal
8 bits per pixel per color external (maximum)
|
|
|
Light source
|
LED
|
|
* Scanning area may be restricted if resolution setting is large.
Automatic document feeder specifications (PX810FW/TX810FW Series)
|
Paper input
|
Face-up loading
|
|
Paper output
|
Face-down ejection
|
|
Paper size
|
A4, Letter, Legal
|
|
Paper types
|
plain papers
|
|
Paper weight
|
64 to 95 g/m²
|
|
Paper capacity
|
Total thickness of 3 mm, up to about 30 sheets (Letter, A4)
10 sheets (Legal) |
Fax specifications (PX810FW/TX810FW Series)
|
Fax type
|
Walk-up black and white and color fax capability
|
|
Support line
|
Household phone line
|
|
Speed
|
Up to 33.6 kbps
|
|
Resolution
|
Monochrome
Standard: 200 × 100 dpi
Fine: 200 × 200 dpi
Photo: 200 × 200 dpi
Color
Fine: 200 × 200 dpi
Photo: 200 × 200 dpi
|
|
Error correction mode
|
ITU-T Group 3 fax with error correction mode
|
|
Speed dial numbers
|
Up to 60
|
|
Page memory
|
Up to 180 pages (ITU-T No.1 chart)
|
|
Redial
|
2 times (with 1 minute interval)
|
|
Interface
|
RJ-11 Phone Line
RJ-11 Telephone set connection
|
Network Interface Specification
|
Wireless LAN
|
Standard:
|
IEEE 802.11b/g
|
|
Security:
|
WEP (64/128bit),
WPA-PSK (TKIP/AES) WPA2 compliant |
|
|
Frequency Band:
|
2.4 GHz
|
|
|
Communication Mode:
|
Ad hoc mode,
Infrastructure mode |
|
|
Wired LAN
|
Standard:
|
Ethernet 100BASE-TX/10 BASE-T
|
Memory card
|
Compatible memory cards
|
CompactFlash
Microdrive
Memory Stick
Memory Stick PRO
Memory Stick Duo*
Memory Stick PRO Duo*
Memory Stick PRO-HG Duo*
Memory Stick Micro*
MagicGate Memory Stick
MagicGate Memory Stick Duo*
SDHC
SD
MultiMediaCard
MMCplus
MMCmobile*
MMCmicro*
miniSDHC*
miniSD*
microSDHC*
microSD*
xD-Picture Card
xD-Picture Card Type M
xD-Picture Card Type M +
xD-Picture Card Type H
|
|
Media format DCF
|
DCF (Design rule for Camera File system) version 1.0 or 2.0 compliant
All card types standard version compliant.
|
|
Voltage Requirements
|
3.3 v
Maximum current is 500 mA
|
* Adapter required.
Photo data specifications
|
File format
|
JPEG with the Exif Version 2.21 standard
|
|
Image size
|
80 × 80 pixels to 9200 × 9200 pixels
|
|
Number of files
|
Up to 9990
|
Movie data specifications (PX810FW/TX810FW Series)
|
File format
|
Video codec
|
Detail *
|
|
AVI
|
Motion-JPEG
|
15 fps: 1024 × 768
30 fps: 640 × 480
60 fps: 320 × 240
|
|
MOV
|
Motion-JPEG
|
15 fps: 1280 × 720
30 fps: 848 × 480
|
|
MPG
|
MPEG1
|
30 fps: 640 × 480
|
* These values are the maximum frame size and the maximum frame rate supported by this printer. Depending on your movie data, this printer may not be able to replay it even if it meets these requirements.
|
File size
|
Up to 2 GB per 1 file
|
|
Number of files
|
Up to 100
|
Mechanical
PX710W/TX710W Series
|
With the Auto Duplexer
|
Without the Auto Duplexer
|
|
|
Dimensions
|
Storage
Width: 446mm (17.6 inches)
Depth: 458mm (18.0 inches)
Height: 150mm (5.9 inches)
|
Storage
Width: 446mm (17.6 inches)
Depth: 385mm (15.2 inches)
Height: 150mm (5.9 inches)
|
|
Printing*1
Width: 446mm (17.6 inches)
Depth: 655mm (25.8 inches)
Height: 150mm (5.9 inches)
|
Printing*1
Width: 446mm (17.6 inches)
Depth: 582mm (22.9 inches)
Height: 150mm (5.9 inches)
|
|
|
Weight*2
|
Approx. 9.7 kg (21.4 lb)
|
Approx. 9.0 kg (19.8 lb)
|
*1 With the output tray extension extended.
*2 Without the ink cartridges and the power cord.
PX810FW/TX810FW Series
|
Dimensions*1
|
Storage
Width: 466mm (18.3 inches)
Depth: 458mm (18.0 inches)
Height: 198mm (7.8 inches)
|
|
Printing*2
Width: 466mm (18.3 inches)
Depth: 655mm (25.8 inches)
Height: 198mm (7.8 inches)
|
|
|
Weight*3
|
Approx. 11.3kg (24.9 lb)
|
*1 With the Auto Duplexer.
*2 With the output tray extension extended.
*3 Without the ink cartridges and the power cord.
Electrical
PX710W/TX710W Series
|
100-120 V Model
|
220-240 V Model
|
||
|
Input voltage range
|
90 to 132V
|
198 to 264V
|
|
|
Rated frequency range
|
50 to 60Hz
|
||
|
Input frequency range
|
49.5 to 60.5Hz
|
||
|
Rated current
|
0.8A
|
0.4A
|
|
|
Power consumption
|
Standalone copying
|
Approx. 25W (ISO/IEC24712)
|
Approx. 25W (ISO/IEC24712)
|
|
Ready mode
|
Approx. 9.5W
|
Approx. 9.5W
|
|
|
Sleep mode
|
Approx. 5.0W
|
Approx. 5.0W
|
|
|
Power off
|
Approx. 0.3W
|
Approx. 0.5W
|
|
PX810FW/TX810FW Series
|
100-120 V Model
|
220-240 V Model
|
||
|
Input voltage range
|
90 to 132V
|
198 to 264V
|
|
|
Rated frequency range
|
50 to 60Hz
|
||
|
Input frequency range
|
49.5 to 60.5Hz
|
||
|
Rated current
|
0.8A
|
0.4A
|
|
|
Power consumption
|
Standalone copying
|
Approx. 26W (ISO/IEC24712)
|
Approx. 26W (ISO/IEC24712)
|
|
Ready mode
|
Approx. 12W
|
Approx. 12W
|
|
|
Sleep mode
|
Approx. 5.5W
|
Approx. 5.5W
|
|
|
Power off
|
Approx. 0.3W
|
Approx. 0.5W
|
|
Note:|
Check the label on the back of the printer for its voltage.
|
Environmental
|
Temperature
|
Operation:
10 to 35 ˚C (50 to 95 ˚F) Storage:
-20 to 40 ˚C (-4 to 104 ˚F) 1 month at 40 ˚C (104 ˚F)
|
|
Humidity
|
Operation:* 20 to 80% RH
Storage:* 5 to 85% RH
|
* Without condensation
Standards and approvals
U.S. model:
|
Safety
|
UL60950-1
CAN/CSA-C22.2 No.60950-1 |
|
EMC
|
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B |
This equipment contains the following wireless module.
Manufacture: Askey Computer Corporation
Type: WLU3072-D69(RoHS)
Manufacture: Askey Computer Corporation
Type: WLU3072-D69(RoHS)
This product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation of the device.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
European model:
|
Low voltage directive 2006/95/EC
|
EN60950-1
|
|
EMC directive 2004/108/EC
|
EN55022 Class B
EN61000-3-2 EN61000-3-3 EN55024 |
|
R&TTE directive 1999/5/EC
|
EN300 328
EN301 489-1 EN301 489-17 TBR21* EN60950-1 |
* This only applies to PX810FW/TX810FW Series.
For European users:
We, Seiko Epson Corporation, hereby declare that the equipment Models, C381A and C391A, are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
We, Seiko Epson Corporation, hereby declare that the equipment Models, C381A and C391A, are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
For use only in;
Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxemburg, Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Iceland, Cyprus, Greece, Slovenia, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia.
Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxemburg, Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Iceland, Cyprus, Greece, Slovenia, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia.
Only indoor operation is permitted in France.
If used outside of own premises, general authorization is required in Italy.
If used outside of own premises, general authorization is required in Italy.
Epson can not accept responsibility for any failure to satisfy the protection requirements resulting a non-recommended modification of the products.
Australian model:
|
EMC
|
AS/NZS CISPR22 Class B
|
Epson hereby declares that the equipment Models, C381A and C391A, are in compliance with the essential requirements and other relevant provisions of AS/NZS4771. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product.
Interface
|
USB 2.0 Hi-Speed (Device Class for computers)
|
|
USB 2.0 Hi-Speed (for PictBridge compliant devices/Mass storage class for external storage)
|
|
Bluetooth Ver2.0+EDR (Option)
|