, 
, 
, or 
buttons to change the LCD screen view to find the mode you want to enter. |
 |
|
||
 |
||||
Bluetooth Printing
Use the , , , or buttons to change the LCD screen view to find the mode you want to enter.
, , , or buttons to change the LCD screen view to find the mode you want to enter. |
Make sure the Bluetooth Photo Print Adapter is connected to the printer and Bluetooth settings have been made.
|
 |
Enter the Setup mode from the Home menu.
|
 |
Enter PictBridge Setup.
|
 |
Enter Print Settings.
|
 |
Enter the settings you want to change and select the required item.
|
Available menu items and default settings vary according to the profile being used.
 |
Confirm the settings and press the OK button. The LCD screen returns to PictBridge Setup menu.
|
 |
Select the data you want to print using your Bluetooth enabled device.
|
 |
Print the data from your Bluetooth enabled device.
|
Note:|
The settings available may vary among Bluetooth enabled devices. For more information, refer to your device’s documentation.
Depending on the size of the data, it may take some time to start printing after the data is sent.
You may not be able to print data 2.5 MB or larger.
Supported image sizes are from 80 x 80 pixels to 9200 x 9200 pixels.
The movie data is not available.
|
For more information about printing from Bluetooth enabled mobile phones, PDAs, mobile PCs, digital still cameras, digital video cameras and other Bluetooth enabled devices, refer to the documentation for both the device and the adapter.
See