 |
 |
|
||
 |
||||
Loading Paper
Loading paper into the rear feeder
 |
Open and extend the paper support.
|
 |
Slide the edge guide.
|
 |
Load the paper short edge first, even for landscape printing, with the printable side up.
|
 |
Place the paper behind the tabs.
|
 |
Slide the edge guide to the right. Make sure it fits under the
 arrow mark inside the left edge guide. |
 |
Open and extend the output tray.
|
Note:|
Leave enough space in front of the printer for the paper to be fully ejected.
Make sure the CD/DVD guide is not extended.
|
Loading paper into the front paper cassette
Note:|
You cannot load Legal size paper or envelopes into the front paper cassette.
|
|
Pull out the front paper cassette.
|
|
Lift off the cover.
|
|
Pinch the knob and slide the paper guides to accommodate the paper size you are loading.
|
|
Load paper with the printable side face down.
|
Note:|
Align the edges of the paper before loading.
Do not load paper above the
arrow mark inside the paper guides. |
|
Fit the edges of the paper snugly against the paper guides. The paper will not be loaded correctly if it overflows or does not fit properly.
|
|
Replace the cover.
|
 |
Keep the cassette flat as you insert it back into the printer.
|
 |
Open and extend the output tray.
|
Note:|
Leave enough space in front of the printer for the paper to be fully ejected.
Make sure the CD/DVD guide is not extended.
Do not remove the front paper cassette while the printer is printing.
|