 |
 Paper
Memory Card Slots
Ink Cartridges
Mechanical
Electrical
Environmental
Standards and Approvals
USB Interface
 |
Note: |
|
|
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot attest to the quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
|
|
Single sheets:
|
Size
|
A4 210 × 297 mm
10 × 15 cm (4 × 6 in)
13 × 18 cm (5 × 7 in)
A6 105 × 148 mm
A5 148 × 210 mm
B5 182 × 257 mm
9 × 13 cm (3.5 × 5 in)
13 × 20 cm (5 × 8 in)
20 × 25 cm (8 × 10 in)
16:9 wide size (102 × 181 mm)
Letter 8 1/2 × 11 in
Legal 8 1/2 × 14 in
|
|
Paper types
|
Plain bond paper or special paper distributed by Epson
|
|
Thickness
(for plain bond paper)
|
0.08 to 0.11 mm (0.003 to 0.004 inch)
|
|
Weight
(for plain bond paper)
|
64 g/m² (17 lb) to 90 g/m² (24 lb)
|
Envelopes:
|
Size
|
Envelope #10 4 1/8 × 9 1/2 in
Envelope DL 110 × 220 mm
Envelope C6 114 × 162 mm
Envelope 132 × 220 mm
|
|
Paper types
|
Plain bond paper
|
|
Weight
|
75 g/m² (20 lb) to 90 g/m² (24 lb)
|
|
Note: |
Single sheets and index cards:
|
Normal
|
Borderless
|
|
|
|
Envelopes:
|
Diagonal lines show printable area.
|
|
A:
|
The minimum top margin is 3.0 mm (0.12").
|
|
B-L:
|
The minimum left margin is 3.0 mm (0.12").
The minimum left margin is 5.0 mm (0.20") for envelopes.
|
|
B-R:
|
The minimum right margin is 3.0 mm (0.12").
The minimum right margin is 5.0 mm (0.20") for envelopes.
|
|
C:
|
The minimum bottom margin is 3.0 mm (0.12") for single sheets and index cards.
|
|
D:
|
The minimum bottom margin is 20 mm (0.78") for envelopes.
|
|
Note: |
|
|
Depending on the type of paper, print quality may decline in the top and bottom areas of the printout, or the area may be smeared.
|
|
|
Compatible memory cards
|
CompactFlash
SmartMedia*
Memory Stick
Memory Stick PRO
Memory Stick Duo**
Memory Stick PRO Duo**
MagicGate Memory Stick
MagicGate Memory Stick Duo**
Microdrive
SD Memory Card
MultiMediaCard
miniSD card**
xD-Picture Card
xD-Picture Card Type M
|
|
Voltage Requirements
|
3.3 v
Maximum current is 500 mA
|
* Maximum capacity is 128 MB.
** Adapter required.
Memory card slot compatibility:
|
CF Type II card slot
|
Compatible with CF+ and CompactFlash Specification 1.4 cards
|
|
SmartMedia card slot
|
Compatible with SmartMedia Standard 2003 cards
|
|
Memory Stick/MemoryStick PRO card slot
|
Compatible with Memory Stick Standard version 1.3 or Memory Stick Standard Memory Stick PRO Format Specifications version 1.0 cards
|
|
SD/MMC card slot
|
Compatible with SD Memory Card Specifications / PART1. Physical Layer Specification Version 1.10 cards and MultiMediaCard Standard cards
|
|
xD-Picture card Slot
|
Compatible with xD-Picture card™ Card Specification Version 1.20 Type M cards
|
|
Color
|
Yellow, Magenta, Cyan, Black, Light cyan, Light magenta
|
|
Cartridge life
|
Within 6 months of opening the package at 25 ˚C (77 ˚F)
|
|
Temperature
|
Storage:
-20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
Freezing:*
-16 ˚C (3.2 ˚F)
|
* Ink thaws and is usable after approximately 3 hours at 25 ˚C (77 ˚F).
 |
Caution: |
|
-
Epson recommends the use of genuine Epson ink cartridges. Other products not manufactured by Epson may cause damage that is not covered by Epson’s warranties, and under certain circumstances, may cause erratic printer behavior.
-
Do not refill the ink cartridge. This product calculates the amount of ink remaining using an IC chip on the ink cartridge, so even if the cartridge is refilled, the IC chip will report that it is empty.
|
|
|
Note: |
|
|
The ink cartridges packaged with your printer are partly used during initial setup. In order to produce high quality printouts, the print head in your printer will be fully charged with ink. This one-off process consumes a quantity of ink and subsequent cartridge sets will last for their full rated life.
|
|
|
Paper path
|
Sheet feeder, top entry
|
|
Sheet feeder capacity
|
About 120 sheets at 90 g/m² (24 lb) paper
|
|
Dimensions
|
Width: 450 mm (17.7 inches)
Depth: 414 mm (16.3 inches)
Height: 210 mm (8.3 inches)
(Including rubber feet, not including loading tray.)
|
|
Weight
|
Approx. 9.3 kg (20.5 lb.)
|
|
|
100-120 V Model
|
220-240 V Model
|
|
Input voltage range
|
90 to 132 V
|
198 to 264 V
|
|
Rated frequency range
|
50 to 60 Hz
|
|
Input frequency range
|
47 to 63 Hz
|
|
Rated current
|
0.6 A (Max. 1.0 A)
|
0.3 A (Max. 0.5 A)
|
|
Power consumption
|
Approx. 22 W (Standalone copying ISO/IEC10561 Letter pattern)
Approx. 11 W in low-power mode
Approx. 1.5 W in sleep mode
Approx. 0.2 W in powered off mode
|
Approx. 22 W (Standalone copying ISO/IEC10561 Letter pattern)
Approx. 11 W in low-power mode
Approx. 1.5 W in sleep mode
Approx. 0.3 W in powered off mode
|
|
Note: |
|
|
Check the label on the back of the printer for its voltage.
|
|
|
Temperature
|
Operation:
10 to 35 ˚C (50 to 95 ˚F)
Storage:
-20 to 60 ˚C (-4 to 140 ˚F)
1 month at 40 ˚C (104 ˚F)
120 hours at 60 ˚C (140 ˚F)
|
|
Humidity
|
Operation:*
20 to 80% RH
Storage:* 5 to 85% RH
|
* Without condensation
U.S. model:
|
Safety
|
UL 60950
CSA C22.2 No.60950
|
|
EMC
|
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
|
European model:
|
Low voltage directive 73/72/EEC
|
EN 60950
|
|
EMC directive 89/336/EEC
|
EN55022 Class B
EN61000-3-2
EN61000-3-3
EN55024
|
Australian model:
|
EMC
|
AS/NZS CISPR22 Class B
|
|
Standard
|
Based on Universal Serial Bus Specifications Revision 2.0, Universal Serial Bus Device Class Definition for Printing Devices Version 1.1, Universal Serial Bus Mass Storage class Bulk-Only Transport Revision 1.0
|
|
Bit rate
|
480 Mbps (High speed device)
|
|
Data encoding
|
NRZI
|
|
Adaptable connector
|
USB Series B
|
|
Recommended cable length
|
Under 2 meters
|
| |
Top