Make sure the Bluetooth Photo Print Adapter is connected to this product and Bluetooth settings have been made. For details on connecting the Bluetooth Photo Print Adapter, see Connecting and disconnecting the Bluetooth Photo Print Adapter. See Bluetooth Settings to set the Bluetooth settings.

Press the Setup button.

Select PictBridge Setup.

1. Select PictBridge Setup.

2. Press the  button.

Note:

If the Bluetooth settings on the LCD panel are unavailable, the adapter may not be connected properly. Disconnect the adapter from this product and reconnect it. See Connecting .

Select the required item using the / buttons, and press the button, then change the setting item using the or button.

1. Select an item.

2. Press the  button.

3. Change the setting.

The available menu items and default settings will vary according to the profile being used.

Confirm the settings and press the OK button on your printer. The LCD returns to the Setup menu.

Select the data you want to print using your Bluetooth-enabled device.

Print the data from your Bluetooth-enabled device.

Note:

The settings available may vary among Bluetooth-enabled devices. For more information, refer to your device’s documentation.

For more information about printing from Bluetooth-enabled mobile phones, PDAs, mobile PCs, digital still cameras, digital video cameras and other Bluetooth-enabled devices, refer to the documentation for both the device and this product.