|
|
|
|||||||||||||||||||||||||||||||||
Using EPSON PhotoQuicker
The system requirements (including the required computer operating system) for EPSON PhotoQuicker and your product may differ. Only the system requirements for EPSON PhotoQuicker are listed here. Refer to your product's documentation for details about its specific system requirements.
|
Item |
Windows |
Macintosh |
|
Operating System |
Microsoft Windows XP, Me, 98, and 2000 |
Mac OS 9.1 or later |
|
Hardware |
DOS/V system equipped with a standard USB interface or parallel interface. A Sound-Blaster or compatible sound card is required to reproduce sound. |
PowerPC equipped with a standard USB interface (PowerPC G3 233 MHz or faster recommended |
|
CPU |
Pentium 166 MHz or higher (Pentium III 500 MHz or faster recommended) |
|
|
Memory |
64 MB (128 MB or more recommended)* |
Mac OS 9.1 or later: 64 MB (128 MB or more recommended)* |
|
Display |
SVGA (800 x 600) 16-bit color or better |
SVGA (800 x 600) 32,000 colors or better |
|
Hard disk |
Installation: 80 MB or more free space Operation: 150 MB or more free space when handling images of 4.8 million pixels* |
Installation: 80 MB or more free space** Operation: If you are handling images that are 4.8 million pixels in size, you need at least 150 MB of free space for Mac OS 9.1 or later and at least 300 MB of free space for Mac OS X.* |
|
CD-ROM drive |
Required |
Required |
 | * Depending on the product or the size of the image, the amount of memory required may differ. For more information, see your product's documentation. |
| ** Images cannot be handled in the Mac OS X UNIX file system. Use an environment where the disk is formatted using HFS+ format. |
 Previous |
 Next |
| Version NPD0905-00, Copyright © 2005, SEIKO EPSON CORPORATION |
