![](files/01.gif) |
Disconnecting the USB cable
![](files/step_1.gif) |
Make sure your printer is turned off and all its lights are off.
|
![](files/step_2.gif) |
Open the scanner unit.
|
![](files/step_3.gif) |
Disconnect the USB cable from your printer.
|
![](files/step_4.gif) |
Close the scanner unit.
|
![](files/mark_wa.gif) Warning:
Be careful not to trap your fingers when closing the scanner unit.
|
When reconnecting the USB cable, follow the steps above, but connect the USB cable in step 3.
| ![](files/01.gif) |