EPSON

Setting the BLUETOOTH Passkey (BT PIN Code Set)

If you select Pairing as the BT Mode or On as the BT Encryption setting, the passkey must be entered into a BLUETOOTH-enabled device before it can communicate with and print from the printer.
Note:
Be sure to set a unique passkey before using BLUETOOTH communication.
To change the passkey, follow the instructions below.
Press the  [Setup] button to enter the Setup mode.
Press the  or  button to select Bluetooth Settings, then press the OK button.
Press the  or  button on the printer to select BT PIN Code Set, then press the button on the printer.
Press the  or  buttons to select a number for the first digit, then press the  or  buttons to change the digit.
Select numbers for the second through fourth digits in the same manner, then press the OK button to activate the passkey.