 |
 General
Memory Card Slots
Mechanical
Electrical
Environmental
Interfaces
Standards and Approvals
 |
Note: |
|
|
Specifications are subject to change without notice.
|
|
|
Scanner type
|
Flatbed color
|
|
Photoelectric device
|
CIS
|
|
Effective pixels
|
10,200 × 14,040 pixels at 1200 dpi
|
|
Document size
|
216 × 297 mm (8.5 × 11.7 inches) A4 or US letter size
|
|
Scanning resolution
|
1200 dpi (main scan)
2400 dpi (sub scan)
|
|
Output resolution
|
50 to 4800, 7200, and 9600 dpi
(50 to 4800 dpi in 1 dpi increments)
|
|
Scanning speed
|
1200 dpi B/W: Approximately 10 msec per line
1200 dpi Color: Approximately 28 msec per line
|
|
Image data
|
16 bits per pixel per color internal
8 bits per pixel per color external (maximum)
|
|
Interface
|
One USB port
|
|
Light source
|
RGB Three Color LED
|
|
Compatible memory cards
|
CompactFlash
Memory Stick
Memory Stick PRO
Memory Stick Duo*
Memory Stick PRO Duo*
MagicGate Memory Stick
MagicGate Memory Stick Duo*
Microdrive
SD Memory Card
SDHC Memory Card
MultiMediaCard
miniSD card*
miniSDHC card*
microSD card*
microSDHC card*
xD-Picture Card
xD Picture Card Type M
xD-Picture Card Type H
|
|
Voltage Requirements
|
3.3 v
Maximum current is 500 mA
|
* Adapter required.
Memory card slot compatibility:
|
CF Type II card slot
|
Compatible with CF+ and CompactFlash Specification 3.0 cards
|
|
Memory Stick/MemoryStick PRO card slot
|
Compatible with Memory Stick Standard version 1.42-00 or Memory Stick Standard Memory Stick PRO Format Specifications version 1.02-00 cards
|
|
SD/MMC card slot
|
Compatible with SD Memory Card Specifications / PART1. Physical Layer Specification Version 2.0 cards and MultiMediaCard Standard Version 4.1 cards
|
|
xD-Picture card Slot
|
Compatible with xD-Picture card, Card Specification Version 1.20 Type M and Type H cards
|
|
Dimensions
|
Width: 450 mm (17.7 inches)
Depth: 414 mm (16.3 inches)
Height: 210 mm (8.3 inches)
|
|
Weight
* Without the ink cartridges
|
Approx. 8.3 kg (18.3 lb)
|
|
Note: |
|
|
Check the label on the back of the scanner for voltage information.
|
|
|
|
100-120 V model
|
220-240 V model
|
|
Input voltage
|
AC 90 to 132 V
|
AC 198 to 264 V
|
|
Rated frequency
|
50 to 60 Hz
|
|
Rated current
|
0.6 A (Max 1.2A)
|
0.3 A (Max 0.6A)
|
|
Power consumption
|
Approx. 16 W
(Standalone copying)
Approx. 5.5 W
(Low Power Mode)
Approx. 2.5 W
(Sleep Mode)
Approx. 0.2 W
(Powered off Mode)
|
Approx. 16 W
(Standalone copying)
Approx. 5.5 W
(Low Power Mode)
Approx. 2.7 W
(Sleep Mode)
Approx. 0.3 W
(Powered off Mode)
|
|
Temperature
|
Operating
|
10 to 35 ˚C (50 to 95 ˚F)
|
|
Storage
|
-20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
|
|
Humidity
|
Operating
|
20 to 80%, without condensation
|
|
Storage
|
5 to 85%, without condensation
|
|
Operating conditions
|
Ordinary office or home conditions.
Avoid operating the scanner in direct sunlight, near a strong light source, or in extremely dusty conditions.
|
|
Interface type
|
Based on Universal Serial Bus Specifications Revision 2.0
|
|
Electrical standard
|
480Mbps (High Speed Device)
|
|
Connector type
|
One Type B port
|
U.S. model:
|
Safety
|
UL60950-1
CAN/CSA-22.2 No. 60950-1
|
|
EMC
|
FCC Part 15 Subpart B Class B
CAN/CSA- CEI/IEC CISPR 22 Class B
|
European model:
|
Low Voltage Directive 73/23/EEC
|
EN 60950-1
|
|
EMC Directive 89/336/EEC
|
EN 55022 (CISPR Pub.22) Class B
EN 55024
EN 61000-3-2
EN 61000-3-3
|
Australian model:
|
EMC
|
AS/NZS CISPR 22 Class B
|
| |
Top