The Printer Does Not Print
The LCD panel and the Lights are off
The LCD panel and the lights came on and then went out
The LCD panel and the lights are on
Ink error message appears after you replace the cartridge
The LCD panel and the Lights are off
The LCD panel and the lights came on and then went out
The printer’s voltage may not match the outlet rating. Turn off the printer and unplug it immediately. Then check the label on the back of the printer.
![](files/mark_ca.gif) |
Caution: |
![](files/01.gif) |
If the voltage does not match, DO NOT PLUG YOUR PRINTER BACK IN. Contact your dealer.
|
|
The LCD panel and the lights are on
If the check page prints correctly, make sure the printer driver and your application are installed correctly.
Ink error message appears after you replace the cartridge
Press the [Setup] button. Use the or button to select Maintenance, and press the OK button.
Use the or button to select Change Ink Cartridge, and press the OK button. Open the scanner unit and the cartridge cover and press the ink cartridges down until they click into place. Then close the cartridge cover and the scanner unit. Next, press the OK button.
|