 |
 Paper
Memory card slots
Ink cartridges
Mechanical
Electrical
Environmental
Standards and approvals
Interface
 |
Note: |
Single sheets:
|
Size
|
A4 210 × 297 mm
10 × 15 cm (4 × 6 in.)
13 × 18 cm (5 × 7 in.)
A6 105 × 148 mm
A5 148 × 210 mm
B5 182 × 257 mm
9 × 13 cm (3.5 × 5 in.)
13 × 20 cm (5 × 8 in.)
20 × 25 cm (8 × 10 in.)
16:9 wide size (102 × 181 mm)
100 × 148 mm
Letter 8 1/2 × 11 in.
Legal 8 1/2 × 14 in.
|
|
Paper types
|
Plain bond paper or special paper distributed by Epson
|
|
Thickness
(for plain bond paper)
|
0.08 to 0.11 mm (0.003 to 0.004 in.)
|
|
Weight
(for plain bond paper)
|
64 g/m² (17 lb) to 90 g/m² (24 lb)
|
Envelopes:
|
Size
|
Envelope #10 4 1/8 × 9 1/2 in.
Envelope DL 110 × 220 mm
Envelope C6 114 × 162 mm
|
|
Paper types
|
Plain bond paper
|
|
Weight
|
75 g/m² (20 lb) to 90 g/m² (24 lb)
|
Diagonal lines show printable area.
Single sheets and index cards:
|
Normal
|
Borderless
|
|
|
|
Envelopes:
|
A:
|
The minimum top margin is 3.0 mm (0.12").
|
|
B-L:
|
The minimum left margin is 3.0 mm (0.12").
|
|
The minimum left margin is 5.0 mm (0.20") for envelopes.
|
|
B-R:
|
The minimum right margin is 3.0 mm (0.12").
|
|
The minimum right margin is 5.0 mm (0.20") for envelopes.
|
|
C:
|
The minimum bottom margin is 3.0 mm (0.12") for single sheets and index cards.
|
|
D:
|
The minimum bottom margin is 20 mm (0.78") for envelopes.
|
|
Note: |
|
|
Depending on the type of paper, print quality may decline in the top and bottom areas of the printout, or the area may be smeared.
|
|
CD/DVD:
|
12-cm CD/DVD
|
8-cm CD/DVD
|
|
Note: |
|
|
If you are printing in the following areas of the disc, the disc or the CD/DVD tray may get stained with ink.
|
|
|
Inner hub area
|
18 to 42 mm
|
|
Outer periphery area
|
117 to 120 mm (12-cm CD/DVD),
77 to 80 mm (8-cm CD/DVD)
|
|
Compatible memory cards
|
CompactFlash
Memory Stick
Memory Stick PRO
Memory Stick Duo*
Memory Stick PRO Duo*
MagicGate Memory Stick
MagicGate Memory Stick Duo*
Microdrive
SD Memory Card
SDHC Memory Card
MultiMediaCard
miniSD card*
miniSDHC card *
microSD card*
microSDHC card*
xD-Picture Card
xD Picture Card Type M
xD-Picture Card Type H
|
|
Voltage Requirements
|
3.3 v
Maximum current is 500 mA
|
* Adapter required.
Memory card slot compatibility:
|
CF Type II card slot
|
Compatible with CF+ and CompactFlash Specification 3.0 cards
|
|
Memory Stick/MemoryStick PRO card slot
|
Compatible with Memory Stick Standard version 1.42-00 or Memory Stick Standard Memory Stick PRO Format Specifications version 1.02-00 cards
|
|
SD/MMC card slot
|
Compatible with SD Memory Card Specifications / PART1. Physical Layer Specification Version 2.0 cards and MultiMediaCard Standard version 4.1 cards
|
|
xD-Picture card Slot
|
Compatible with xD-Picture card™ Card Specification Version 1.20 Type M and Type H cards
|
|
Color
|
Yellow, Magenta, Cyan, Black, Light Magenta, Light Cyan
|
|
Cartridge life
|
Use within 6 months of opening the package.
|
|
Temperature
|
Storage:
-20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
Freezing:*
-16 ˚C (3.2 ˚F)
|
* Ink thaws and is usable after approximately 3 hours at 25 ˚C (77 ˚F).
 |
Caution: |
|
-
Epson recommends the use of genuine Epson ink cartridges. Other products not manufactured by Epson may cause damage that is not covered by Epson’s warranties, and under certain circumstances, may cause erratic printer behavior.
-
Do not refill the ink cartridge. Other products not manufactured by Epson may cause damage that is not covered by Epson’s warranties, and under certain circumstances, may cause erratic printer behavior.
|
|
|
Note: |
|
-
The ink cartridges packaged with your printer are partly used during initial setup. In order to produce high quality printouts, the print head in your printer will be fully charged with ink. This one-off process consumes a quantity of ink and subsequent cartridge sets will last for their full rated life.
|
|
|
Paper path
|
Sheet feeder, top entry
|
|
Sheet feeder capacity
|
About 120 sheets at 90 g/m² (24 lb) paper
|
|
Dimensions
|
Storage
Width: 450 mm (17.7 inches)
Depth: 414 mm (16.3 inches)
Height: 210 mm (8.3 inches)
|
|
Printing
Width: 450 mm (17.7 inches)
Depth: 534 mm (21.0 inches)
Height: 281 mm (11.1 inches)
|
|
Weight
|
Approx. 8.3 kg (18.3 lb) without the ink cartridges
|
|
|
100-120 V Model
|
220-240 V Model
|
|
Input voltage range
|
AC 90 to 132 V
|
AC 198 to 264 V
|
|
Rated frequency range
|
50 to 60 Hz
|
|
Input frequency range
|
49.5 to 60.5 Hz
|
|
Rated current
|
0.6 A (Max. 1.2 A)
|
0.3 A (Max. 0.6 A)
|
|
Power consumption
|
Copying
|
Approx. 16 W (ISO/IEC10561 Letter Pattern)
|
Approx. 16 W (ISO/IEC10561 Letter Pattern)
|
|
Low power mode
|
Approx. 5.5 W
|
Approx. 5.5 W
|
|
Sleep mode
|
Approx. 2.5 W
|
Approx. 2.7 W
|
|
Powered off mode
|
Approx. 0.2 W
|
Approx. 0.3 W
|
|
Note: |
|
|
Check the label on the back of the printer for its voltage.
|
|
|
Temperature
|
Operation:
10 to 35 ˚C (50 to 95 ˚F)
Storage:
-20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
|
|
Humidity
|
Operation:*
20 to 80% RH
Storage:* 5 to 85% RH
|
* Without condensation
U.S. model:
|
Safety
|
UL 60950-1
CAN/CSA-22.2 No.60950-1
|
|
EMC
|
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
|
European model:
|
Low voltage directive 73/72/EEC
|
EN 60950-1
|
|
EMC directive 89/336/EEC
|
EN55022 (CISPR Pub.22) Class B
EN61000-3-2
EN61000-3-3
EN55024
|
Australian model:
|
EMC
|
AS/NZS CISPR22 Class B
|
|
USB 2.0 Hi-Speed (Device Class for computers)
|
|
USB 2.0 Hi-Speed (Mass Storage Class for external storage devices)
|
|
Bluetooth Ver. 2.0+EDR (Option)
|
|
IrDA Ver. 1.3
|
| |
Top