Disconnecting the USB Cable
Disconnecting the USB cable
Disconnecting the USB cable
![](files/step_1.gif) |
Make sure the printer is turned off and all of its lights are off.
|
![](files/step_2.gif) |
Open the scanner unit.
|
![](files/step_3.gif) |
Disconnect the USB cable and remove it as shown:
|
![](files/step_4.gif) |
Close the scanner unit.
|
![](files/mark_wa.gif) |
Warning: |
![](files/01.gif) |
Be careful not to trap your fingers when closing the scanner unit.
|
|
When reconnecting the USB cable, follow the steps above, but connect the USB cable in step 3.
|