EPSON

Adding a Printer or Connecting a Scanner (for Mac OS X)

Adding a printer

For Mac OS X 10.3: add the printer to the Mac OS X printer list.
Double-click the Macintosh HD icon.
Note:
If the Macintosh HD icon name has been changed, double-click the icon of the drive running Mac OS X.
Double-click the Applications folder, Utilities folder, then Printer Setup Utility icon.
If the Printer List screen or a message screen appears, click Add.
Select the printer from the list, then click Add on the Printer Browser screen.
For Mac OS X 10.3, select Rendezvous on the Printer List screen, click the printer, and then click Add.
Note:
To print via Rendezvous (Mac OS X 10.3)/Bonjour (Mac OS X 10.4 or later), the printer and computer need to automatically obtain an IP address via the DHCP function. If a unique IP address is assigned to the printer, select EPSON TCP/IP (or TCP/IP).
For Mac OS X 10.5: Add the printer to the application’s File menu.
In Finder, or from an application such as TextEdit, select File and then Print.
Select Add Printer from the Printer list.

Connecting/checking the scanner

Set the EPSON Scan connection and check the performance.
Note:
This feature is not available for all printers or may not be enabled.
Double-click Macintosh HD, Applications, Utilities and then EPSON Scan Settings.
Note:
If the scanner is listed but cannot be selected immediately after the EPSON Scan Settings screen appears. Wait for the search to end.
Verify that the printer is selected, click Network and then Add.
Enter the Scanner Name, and wait for the search to end.
Click the printer’s IP address, then click OK.
Note:
If the address does not appear, check the connection and click Retry, or click Enter address and directly enter the IP address. Entering the IP address directly disables the IP address auto-follow function.
Click the scanner, then click Test.
Verify that The connection test was successful and the scanner name are displayed, and click OK.