![](files/01.gif) |
Initializing the Network Interface Settings
If you want to restore the network settings to the factory default settings, follow the instructions below.
Using the LCD panel
For Type A printers:
![](files/step_1.gif) |
Enter the Setup mode.
|
![](files/step_2.gif) |
Select Restore Default Settings.
|
![](files/step_3.gif) |
Select Network Settings or All Settings.
|
![](files/step_4.gif) |
Select Yes to restore the factory default settings.
|
For Type B printers:
![](files/step_1.gif) |
Press the Menu button.
|
![](files/step_2.gif) |
Select Restore Default Settings, and then press OK.
|
![](files/step_3.gif) |
Select Reset Network Settings or Reset All Settings, and then press OK.
|
![](files/step_4.gif) |
Select Yes to restore the factory default settings.
|
| ![](files/01.gif) |