|
For using the printer
For using the User’s Guide
To use this printer, you must have Windows XP Home Edition, Millennium Edition, 98 Second Edition, XP Professional x64 Edition, XP Professional, or 2000 Professional installed. For details on interfaces and operating systems, refer to the following table.
Interface
|
System
|
USB 2.0
|
Windows XP Home Edition, XP Professional x64 Edition, XP Professional, and 2000 Professional
(Operating systems upgraded from Windows Millennium Edition, 98, and 95 are not supported by the software.)
USB 2.0 Host Driver by Microsoft must be used.
|
USB 1.1
|
Windows XP Home Edition, Millennium Edition, 98 Second Edition, XP Professional x64 Edition, XP Professional, and 2000 Professional
(Operating systems upgraded from Windows 95 are not supported by the software.)
The USB interface must be used in full speed mode.
|
To connect this printer to a Macintosh computer, you must use a USB cable. For details on interfaces and operating systems, refer to the following table.
Interface
|
System
|
USB 2.0/USB 1.1
|
PowerPC-based Macintosh computers running Mac OS X 10.2.8 or later
Intel-based Macintosh computers with Rosetta
|
For using the User’s Guide
For Windows
|
Browser
|
Microsoft Internet Explorer 5.0 or later (recommended)
|
For Macintosh
|
Browser
|
Microsoft Internet Explorer 5.0 or later (recommended)
Safari 1.0 or later
|
| |