 |
 Windows System Requirements
Make sure your system meets the requirements in these sections before using it with your scanner.
Windows System Requirements
Check your Windows system to see which type of interface you are using. Then see the appropriate section for your system below.
Windows Systems With USB 2.0 Ports
|
System
|
Microsoft Windows XP Home Edition or Professional, or 2000 Professional
(Operating systems upgraded from Windows Me, 98, and 95 are not supported by the software.)
|
|
Interface
|
USB port (Type A) built into the main board
|
|
Display
|
SVGA or higher resolution monitor
800 × 600, 16-bit (High Color) screen resolution or higher
(Color and tone reproduction are subject to the display capability of your computer system, including the video card, display monitor, and software. See your system documentation for details.)
|
 |
Note: |
|
|
USB 2.0 is backward-compatible with USB 1.1.
|
|
Windows Systems With USB 1.1 Ports
|
System
|
Microsoft Windows XP Home Edition or Professional, Me, 98, or 2000 Professional
(Operating systems upgraded from Windows 95 are not supported by the software.)
The USB interface must be used in full speed mode.
|
|
Interface
|
USB port (Type A) built into the main board
|
|
Display
|
SVGA or higher resolution monitor
800 × 600, 16-bit (High Color) screen resolution or higher
(Color and tone reproduction are subject to the display capability of your computer system, including the video card, display monitor, and software. See your system documentation for details.)
|
| |
Top